pic

Dr. Gopi K. R.

Assistant Professor, Faculty ID: 1-7504428436

Ph.D

9916666873

mcegopi@gmail.com

Ph.D

Assistant Professor, Faculty ID: 1-7504428436

R  Presented technical paper in National Conference on "Advances in Mechanical Engineering (AIME-2019)" organized by the Department of Mechanical Engineering, Rajeev Institute of Technology, Hassan held during May, 2019.

Interational Conference

R  Presented technical paper in "International Conference on recent trends in Engineering and Material Sciences (ICEMS-2016)" organized by Jaipur National University, Jaipur held during March, 2016.

National Journal

 .

International Journal

R  K.R. Gopi, H. Shivananda Nayaka and Sandeep Sahu “Investigation of Microstructure and Mechanical Properties of ECAP-Processed AM Series Magnesium Alloy”, Journal of Materials Engineering and Performance, 2016, 25(9), 3737-3745. (IF-1.819)

R  K.R. Gopi and H. Shivananda Nayaka “Tribological and corrosion properties of AM70 magnesium alloy processed by equal channel angular pressing”, Journal of Materials Research, 2017, 32(11), 2153-2160. (IF-2.502)

R  K.R. Gopi, H. Shivananda Nayaka and Sandeep Sahu “Microstructural Evolution and Strengthening of AM90 Magnesium Alloy processed by ECAP”, Arabian Journal for science and Engineering” 2017, 42(11), 4635-4647. (IF-2.334)

R  K.R. Gopi, H. Shivananda Nayaka and Sandeep Sahu “Wear properties of ECAP-Processed AM80 Magnesium Alloy”, Journal of Materials Engineering and Performance, 2017, 26(7), 3399-3409. (IF-1.819)

R  K.R. Gopi, H. Shivananda Nayaka and Sandeep Sahu “Corrosion Behavior of ECAP-Processed AM90 Magnesium Alloy”, Arabian Journal for science and Engineering, 2018, 43 (9), 4871-4878. (IF-2.334)

R  K.R. Gopi and H. Shivananda Nayaka “Microstructure and mechanical properties of magnesium alloy processed by equal channel angular pressing (ECAP)”, Materials Today: Proceedings, 2017, 4(9), 10288-10292. (Scopus).  

R  T.R. Praveen, K.R. Gopi and H. Shivananda Nayaka “Numerical Simulation of Shot Peening Process on Equal Channel Angular Pressed Magnesium Alloy”, Silicon, 2018, 10(6), 2463-2472.  (IF-2.67)

R  R. Sampath, H.S. Nayaka, K.R. GopiS. Sahu, Udaya Bhat “Investigation of microstructure and mechanical properties of the Cu-3% Ti alloy processed by multiaxial cryo-forging”, Journal of Materials Research, 2018, 33(22), 3700-3710. (IF-2.502)

R  R. Sampath, H.S. Nayaka, K.R. GopiS. Sahu “Effect of multiaxial cryoforging on microstructure and mechanical properties of a Cu-Ti Alloy”, Materials Research Express, 2018, 6(2), 026556. (IF-1.620).

R  B. Kuldeep, K.P. Ravikumar, S. Pradeep and K.R. Gopi “Effect of boron nitride and zirconium dioxide on mechanical behavior of Al7075 metal matrix hybrid composite”, Materials Research Express, 2018, 6(3), 036509. (IF-1.620).

R  R. Sampath, H.S. Nayaka, K.R. Gopi “Influence of Multi Axial Forging (MAF) on Microstructure and Mechanical Properties of Cu-Ti Alloy”, Materials Today: Proceedings, 2018, 5(11), 25534-25540. (Scopus).  

R  R. Sampath, H.S. Nayaka, G. Anne and K.R. Gopi “Influence of cold rolling process on microstructure and mechanical properties of Cu-1.5%Ti alloy” in “AIP Conference Proceedings” 2018, 1943(1), 020055. (Scopus).  

R  S. Vasanth, H. Krishna, K.R. Gopi and G. Anne “Influence of heat treatment on Cr and Fe-rich precipitates in thermally aged duplex steels” Emerging Materials Research, 2018, 7(3), 153-159. (IF-0.640).  

R  R. Sampath, H.S. Nayaka, Sandeep sahu, K.R. Gopi, M.J. Shivaram, and Shashibhushan Arya “Influence of Multiaxial Cryoforging on Microstructural, Mechanical, and Corrosion Properties of Copper-Titanium Alloy” Journal of Materials Engineering and Performance, 2019, 28(12), 7629-41 (IF-1.819). 

R  K.R. Gopi, H. Shivananda Nayaka “Impact of ECAP on wear performance of Al–Mn magnesium alloy”, Materials Research Express, 2020, 7(1), 016550. (IF-1.620).

R  T.R. Praveen, H. Shivananda Nayaka, Swaroop, S, K.R. Gopi “Strength enhancement of magnesium alloy through equal channel angular pressing and laser shock peening”, Applied Surface Science, 2020, 512, 145755.  (IF-6.707)

R  Shivashankara, B. S., K. R. Gopi, S. Pradeep, and R. Raghavendra Rao "Investigation of mechanical properties of ECAP processed AL7068 aluminium alloy", IOP Conference Series: Materials Science and Engineering, 2021, 1189, 012027.

R  Rao, R. Raghavendra, S. Pradeep, S. Karthik, K. R. Gopi, and B. S. Shivashankara "Experimental Investigation of effect of hybridization of UHMWPE fibers on the mechanical and physical properties of Basalt fiber reinforced polymer matrix composites", IOP Conference Series: Materials Science and Engineering, 2021, 1189, 012025.

 .

 Technical Achievements

R  Presented technical paper in "International Conference on recent trends in Engineering and Material Sciences (ICEMS-2016)" organized by Jaipur National University, Jaipur held during March, 2016.

R  Participated in National Conference on "Fluid Mechanics and Fluid Power (FMFP)" organized by the Department of Mechanical Engineering, National Institute of Technology Karnataka (NITK) surathkal, Mangalore held during December, 2015.

R  Participated in UGC-NRCM workshop on "Interface Related Mechanical Behavior of Materials-II" organized by the Department of Materials Engineering, Indian Institute of Science (IISc), Bangalore held during November, 2015.

R  Participated in workshop on "Engineering Failure Analysis" organized by the Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka (NITK) surathkal, Mangalore held during August, 2014.

R  Certificate Course on “Materials Characterization” organized by the Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras (IITM), Madras held during July, 2016.

R  Participated in workshop on "Computational Dynamics" organized by the Department of Mechanical Engineering, National Institute of Technology Karnataka (NITK) surathkal, Mangalore held during September, 2016.

R  Participated in workshop on "Advanced Materials and Manufacturing" organized by the Department of Mechanical Engineering, National Institute of Technology Karnataka (NITK) surathkal, Mangalore held during September, 2016.

R  Participated in workshop on "Tribology Frontiers in Design and Manufacturing" organized by the Department of Mechanical Engineering, National Institute of Technology Karnataka (NITK) surathkal, Mangalore held during October, 2016.

R  Participated in workshop on “Recent trends in Automobile Engineering” organized by the Department of Mechanical Engineering. Malnad College of Engineering, Hassan held during July 2018.

R  Participated in Faculty Development Program on “Product Design Engineering using Fusion 360” held at PESCE, Mandya during January 2019.

R  Completed NPTEL Certification course (12 weeks) on “Introduction to composites” during April 2019.

R  Presented technical paper in National Conference on "Advances in Mechanical Engineering (AIME-2019)" organized by the Department of Mechanical Engineering, Rajeev Institute of Technology, Hassan held during May, 2019.

R  Participated in workshop on “3D Printing” organized by STRATASYS, in Bangalore held during November 2019.

 

Onsite Achievements

R  Presented technical paper in "6th International engineering symposium-IES2017” organized by Kumamoto University, Japan held during March 1-3, 2017.

R  Attended JASSO Scholarship program, Spring Internship in Kumamoto University, Japan held during March 4-7, 2017.

R  Trained at PWC Singapore (Loyang crescent) for a period of 3 months in line maintenance and overhaul on PWC Aero Engine families (PW100 series engines).

R  Developed good understanding with the customers through onsite visit (PWC-Singapore) to meet the expectation.

R  Undergone technical training program on "Aero Engine Repair" from Hindustan Aeronautics Limited, Bangalore.

Severe Plastic Deformation (SPD), Composite Materials

Contact

PO's and PSO's  
 
 
 
 
 
Building

R  Participated in National Conference on "Fluid Mechanics and Fluid Power (FMFP)" organized by the Department of Mechanical Engineering, National Institute of Technology Karnataka (NITK) surathkal, Mangalore held during December, 2015.

R  Participated in UGC-NRCM workshop on "Interface Related Mechanical Behavior of Materials-II" organized by the Department of Materials Engineering, Indian Institute of Science (IISc), Bangalore held during November, 2015.

R  Participated in workshop on "Engineering Failure Analysis" organized by the Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka (NITK) surathkal, Mangalore held during August, 2014.

R  Certificate Course on “Materials Characterization” organized by the Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras (IITM), Madras held during July, 2016.

R  Participated in workshop on "Computational Dynamics" organized by the Department of Mechanical Engineering, National Institute of Technology Karnataka (NITK) surathkal, Mangalore held during September, 2016.

R  Participated in workshop on "Advanced Materials and Manufacturing" organized by the Department of Mechanical Engineering, National Institute of Technology Karnataka (NITK) surathkal, Mangalore held during September, 2016.

R  Participated in workshop on "Tribology Frontiers in Design and Manufacturing" organized by the Department of Mechanical Engineering, National Institute of Technology Karnataka (NITK) surathkal, Mangalore held during October, 2016.

R  Participated in workshop on “Recent trends in Automobile Engineering” organized by the Department of Mechanical Engineering. Malnad College of Engineering, Hassan held during July 2018.

R  Participated in Faculty Development Program on “Product Design Engineering using Fusion 360” held at PESCE, Mandya during January 2019.

R  Completed NPTEL Certification course (12 weeks) on “Introduction to composites” during April 2019.

R  Participated in workshop on “3D Printing” organized by STRATASYS, in Bangalore held during November 2019.

 

 

R  Mr. Shivashankar, Part-time, Assistant Professor, Department of Mechanical Engineering, MCE-Hassan (Completed)

 

R  Mrs. Vidyashree, Full time, Research Scholar, Department of Automobile Engineering, MCE-Hassan (On-going)

Malnad College of Engineering