• Muralidhara B, Babu SPK, Vasundhara MG, et al (2025) Enhanced mechanical, thermal, and wear performance of halloysite nanotube infused carbon fiber epoxy composites. Sci Reports 2025 151 15:30019-. https://doi.org/10.1038/s41598-025-15142-1

• Manivannan GS, Vasundhara MG, R G C, et al (2025) Unified Approach to Detection of Induction Motor Faults from Vibration Signals using Hilbert Transform based Autoencoder Features and Hybrid Efficient Machine Learning Algorithms. 1–5. https://doi.org/10.1109/ICICKE65317.2025.11136571

• Manivannan GS, Deb S, Vasundhara MG, et al (2025) Performance Analysis of Artificial Gorilla Troop Optimization Algorithm Features based BAT Algorithm for Ground Vibrations Detection using Different Geophone Sensors. 2025 Int Conf Data Sci Agents Artif Intell ICDSAAI 2025. https://doi.org/10.1109/ICDSAAI65575.2025.11011823

• Chaithra CM, Kalavathi GK, Vasundhara MG, et al (2025) A Wavelet-Based Stochastic Interpretable Physics-Guided Neural Network to Study the Periodic Heat Transport in a Radiative Convex Fin. Heat Transf 54:4428–4443. https://doi.org/10.1002/HTJ.70003

• Chaithra CM, Kalavathi GK, Vasundhara MG, et al (2025) Thermal analysis of a wetted fin of wavy pattern under convective-radiative heat transfer using artificial neural network. Ain Shams Eng J 16:103621. https://doi.org/10.1016/J.ASEJ.2025.103621

Thapliyal S, Joshi A, Gairola S, Vasundhara MG et al (2025) A Study of Impact Toughness Behavior and High Cycle Fatigue Properties of Al-Li 8090 Alloy Processed by Cryorolling and Post-Deformation Annealing. Metallogr Microstruct Anal. https://doi.org/10.1007/s13632-025-01184-4

Senthilkumar M, Satish VT, Bright RJ, Vasundhara MG et al (2025) Investigations on the high-temperature wear behaviour of LM25 aluminium alloy/silicon carbide foam interpenetrating phase composites synthesized using gas pressure infiltration. Surf Topogr Metrol Prop 13:15005. https://doi.org/10.1088/2051-672X/ada6e2

Pradeesh, E. L., Udhayakumar, S., Vasundhara, M. G., & Kalavathi, G. K. (2022). A review on piezoelectric energy harvesting. Microsystem Technologies, 28(8), 1797–1830. https://doi.org/10.1007/S00542-022-05334-4/FIGURES/1

Somashekhar M, Kalavathi GK, Vasundhara MG, Dinesh PA (2023) Intelligent Systems And Applications In Analysis of Viscous Shear Effect in the Boundary Layer Region of Porous Medium of Infinitely Long Journal Bearing. Int J INTELLIGENTINTELLIGENT Syst Appl Eng 11:663–676

Pradeesh EL, Udhayakumar S, Vasundhara MG, Kalavathi GK (2023) Experimental and numerical analysis on different beam geometries for vibration based piezoelectric energy harvester. Ferroelectrics 606:219–238. https://doi.org/10.1080/00150193.2023.2189838

Vasundhara MG, Kalavathi GK, Pradeesh EL, et al (2023) Simulation of Self Tuning Shape Memory Alloy Based PZT Energy Harvester. J Mines, Met Fuels 71:2669–2677. https://doi.org/10.18311/jmmf/2023/41751

Pradeesh, E. L., Udhayakumar, S., Vasundhara, M. G., & Nijandhan, K. (2021). Design and development of frequency tuneable vibration based piezoelectric energy harvester. https://doi.org/10.1080/00150193.2021.1984779

Senthilkumar, M, Vasundhara, MG & F, Rohit Adaikala Raj, (2019) ‘A Study on Tunable Vibration Based Energy Harvester Using Shape Memory Effect. National Journal of Technology, vol 14, no. 6, pp. 29-32 (ISSN - 0973 – 1334)

Senthilkumar, M, Vasundhara, MG & F, Rohit Adaikala Raj, (2019) ‘A Study on Tunable Vibration Based Energy Harvester Using Shape Memory Effect. National Journal of Technology, vol 14, no. 6, pp. 29-32 (ISSN - 0973 – 1334)

GK, Kalavathi, FA Najar, and Vasundhara MG. 2019. “Performance Characteristics of Journal Bearings (Porous Type): A Coupled Solution Using Hartmann Number and Roughness Parameter.” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, November, 135065011988670.  https://doi.org/10.1177/1350650119886709

Vasundhara, MG, Senthilkumar, M & Kalavathi, GK 2019, ‘A Distributed Parametric Model of Shape Memory Alloy based Resonant Frequency Tunable Cantilevered PZT Energy Harvester with tip mass’, International ISSS Journal of Micro and Smart Systems, vol. 8, no. 1, pp. 13–24. (ISSN: 2509-7989) https://doi.org/10.1007/S41683-019-00034-0

Vibration Based Piezoelectric Energy Harvesting - A Review IOP Conf. Series: Materials Science and Engineering 995 (2020) 012007
IOP Publishing doi:10.1088/1757-899X/995/1/012007

 Vasundhara, MG, Senthilkumar, M & Kalavathi, GK 2018, ‘A distributed parametric model of Brinson shape memory alloy based resonant frequency tunable cantilevered PZT energy harvester’, International Journal of Mechanics and Materials in Design, vol. 15, no. 3, pp. 555–568. Updated List of Journals (ISSN: 1573-8841) Impact factor – 3.143.

Senthilkumar, M, Vasundhara, MG & Kalavathi, GK 2018, ‘Electromechanical analytical model of shape memory alloy based tunable cantilevered piezoelectric energy harvester’, International Journal of Mechanics and Materials in Design,      vol. 15, no. 3, pp. 611–627. Updated List of Journals (ISSN: 1573-8841), https://doi.org/10.1007/S10999-018-9413-X/TABLES/3

Sanjay M R, Arpitha G R,Vasubdhara M G, B Yogesha, ”Study on Mechanical Characteristics of Unidirectional Sisal/Glass Fiber Reinforced Polyester Hybrid Composites ”,International Journal of Science and Research (IJSR),Volume 3 Issue 8, August 2014, ISSN: 585-588.

Kalavathi G.K., M. Somashekhar, Vasundhara M.G.,Yogesha K.K Analytical Study of Roughness on Tilted Pad Thrust Slider Bearing Improved by the Boundary Slippage. Applied Mechanics and Materials Vol. 895, pp 70-75. https://doi.org/10.4028/WWW.SCIENTIFIC.NET/AMM.895.70

Swathi S P, M G Vasundhara, Dr B Yogesh “ PLC based automatic liquid Racking System” International Journal of Engineering Research & Technology, vol 2 Issue 8 Aug 2013

Roop R, M G Vasundhara, Dr K R Prakash “A low cost PLC based automatic liquid filling and sorting system” International Journal of Scientific and Engineering Research 2012

Roop R, M G Vasundhara, Dr K R Prakash “A low cost PLC based automatic liquid filling and sorting system” Proc. Punjab university   Oct 5th & 6th 2012

Sudheer Kulkarni, Vasundhara M G, Chetan S, Satish S Nadig “Comparative study of flexural behavior of silicon carbide Graphite and mixture of silicon carbide graphite filled glass fiber reinforced vinyl ester” Proc. International Conference Recent Trends in Materials and Characterization NITK Surthakal  Feb 14th & 15th 2010.

Satish S Nadig, Sudheer Kulkarni, Chetan S, Vasundhara M G “Comparative study of tensile behavior of silicon carbide Graphite and mixture of silicon carbide graphite filled glass fiber reinforced vinyl ester” Proc. International Conference Recent Trends in Materials and Characterization NITK Surthakal  Feb 14th & 15th 2010.

Chetan S, Satish S Nadig, Sudheer Kulkarni, Vasundhara M G “Comparative study of Abrasive wear resistance of silicon carbide Graphite and mixture of silicon carbide graphite filled glass fiber reinforced vinyl ester” Proc. International Conference Recent Trends in Materials and Characterization  NITK Surthakal  Feb 14th & 15th 2010.

Vasundhara M G, Chetan S, Satish S Nadig, Sudheer Kulkarni,  “Comparative study of abrasive behavior of silicon carbide Graphite filled unsaturated polyester glass fiber composite” Proc. International Conference Recent Trends in Materials and Characterization NITK Surthakal Feb 14th & 15th 2010.

Vasundhara M G, Chetan S “Abrasive Wear Behaviors of Graphite Filled Unsaturated Polyester Glass Fiber Composite” Proc.Advance in Mechanical Engineering Don Bosco Institute of Technology  Bangalore  Mar 30th & Mar 31st 2009.

Vasundhara M G, Chetan S “Comparative Study of Abrasive Wear Resistance of Mixture of Silicon carbide-Graphite Filled Glass Fiber Reinforced Polyester Composite” Proc. Recent Trend in Mechanical Engineering Vemana Institute of Technology Bangalore Nov 23th & 24th 2009.