Sathyanarayana, K., Puttegowda, M., Rangappa, S.M., Siengchin, S., Shivanna, P., Nagaraju, S.B., Somashekara, M.K., Girijashankar, P.B. and Yashas Gowda T.G 2023. Metallic lightweight materials: properties and their applications. In Lightweight and Sustainable Composite Materials (pp. 47-67). Woodhead Publishing.

Jagadeesh P, Puttegowda M, Rangappa SM, Siengchin S. Accelerated weathering of sustainable and micro-filler Basalt reinforced polymer biocomposites: Physical, mechanical, thermal, wettability, and water absorption studies. Journal of Building Engineering. 2023 Dec 1;80:108040.

Nagaraju SB, Somashekara MK, Govindaswamy PD, Puttegowda M, Shankar PB, Sathyanarayana K. Wear behaviour of hybrid (boron carbide-graphite) aluminium matrix composites under high temperature. Journal of Engineering and Applied Science. 2023 Dec;70(1):124.

Jagadeesh P, Puttegowda M, Suyambulingam I, Gupta MK, Mavinkere Rangappa S, Siengchin S. Analysis of friction and wear performance of eco-friendly basalt filler reinforced polylactic acid composite using the Taguchi approach. Journal of Thermoplastic Composite Materials. 2023 Nov 17:08927057231211231.

Jagadeesh P, Rangappa SM, Puttegowda M, Suyambulingam I, Siengchin S. Thermal analysis of sustainable and micro-filler Basalt reinforced polymer biocomposites for lightweight applications. Journal of Building Engineering. 2023 Nov 15;79:107869.

Karthik S, Sharath BN, Madhu P, Madhu KS, Prem Kumar BG, Verma A. Experimental and artificial neural network-based slurry erosion behavior evaluation of cast iron. International Journal on Interactive Design and Manufacturing (IJIDeM). 2023 Nov 13:1-1.

Sharath BN, Madhu KS, Pradeep DG, Madhu P, Premkumar BG, Karthik S. High Temperature Tensile Behaviour of Ceramic-Hybridized Metal Matrix Composites for Above-Room-Temperature Applications. Silicon. 2023 Nov 10:1-2.

Puttegowda M, Girijappa YG. Innovative polymer science: Groundbreaking materials for a sustainable future. Insight-Material Science. 2023 Oct 9;6(1).

Sharath BN, Madhu P, Verma A. Enhancing tribological performance: A review of ceramic reinforced aluminium hybrid composites for high-temperature engineering applications. Hybrid Advances. 2023 Oct 1:100094.

Conjectured hybrid power with artificial intelligence and single-axis solar tracking wind turbine

Effects of tertiary ceramic additives on the micro hardness and wear characteristics of Al2618+ Si3N4-B4C-Gr hybrid composites for automotive applications

Predictive Analysis of Slurry Erosion Behaviour in Aluminium-Based Hybrid Metal Matrix Composites: Experimental and Machine Learning Approach

Jagadeesh, P., Puttegowda, M., Yashas Gowda T.G., Sathyanarayana, K., Rangappa, S.M., Siengchin, S. and Hassan, S.A., 2023. Lightweight and sustainable materials for structural applications. In Lightweight and Sustainable Composite Materials (pp. 197-217). Woodhead Publishing.

Sharath BN, Madhu KS, Pradeep DG, Madhu P, Premkumar BG, Karthik S. High Temperature Tensile Behaviour of Ceramic-Hybridized Metal Matrix Composites for Above-Room-Temperature Applications. Silicon. 2023 Nov 10:1-2.  [SCIE INDEX] 

Nagaraju, S.B., Priya, H.C., Yashas Gowda T.G and Puttegowda, M., 2023. Lightweight and sustainable materials for aerospace applications. In Lightweight and Sustainable Composite Materials (pp. 157-178). Woodhead Publishing.

Sharath Ballupete Nagaraju, Madhu Puttegowda, Madhu Kodigarahalli Somashekara, Yashas Gowda Thyavihalli Girijappa, Pradeep Dyavappanakoppalu Govindaswamy, Karthik Sathyanarayana Advancing the Performance of Ceramic - Reinforced Aluminum Hybrid Composites: A Comprehensive Review and Future Perspectives,  Applied Science and Engineering Progress 17(02):7034

Puttegowda, M. and Girijappa, Y.G.T., 2023. Innovative polymer science: Groundbreaking materials for a sustainable future. Insight-Material Science, 6(1).

Yashas Gowda  Thyavihalli Girijappa, Ballupete Nagaraju, S., Puttegowda, M., Verma, A., Rangappa, S.M. and Siengchin, S., 2023. Biopolymer-Based Composites: An Eco-Friendly Alternative from Agricultural Waste Biomass. Journal of Composites Science, 7(6), p.242.

Ashrith, H. S., Jeevan, T. P., & Divya, H. G. V. (2023). 3D Printing of Crystalline Polymers. Polymer Crystallization: Methods, Characterization and Applications, 233-254. 

Ashrith, H. S., Jeevan, T. P., & Xu, J. (2023). A Review on the Fabrication and Mechanical Characterization of Fibrous Composites for Engineering Applications. Journal of Composites Science, 7(6), 252. 

Sharath, B.N., Karthik, S., Madhu, P., Madhu, K.S. and Pradeep, D.G., 2023. Predictive Analysis of Slurry Erosion Behaviour in Aluminium-Based Hybrid Metal Matrix Composites: Experimental and Machine Learning Approach. Journal of Bio-and Tribo-Corrosion, 9(4), p.70.

Nagaraju, S.B., Sathyanarayana, K., Somashekara, M.K., Pradeep, D.G., Puttegowda, M. and Verma, A., 2023. Artificial neural networks for predicting mechanical properties of Al2219-B4C-Gr composites with multireinforcements. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, p.09544062231196038.

Nagaraju, S.B., Somashekara, M.K., Govindaswamy, P.D., Puttegowda, M., Girijashankar, P.B. and Sathyanarayana, K., 2023. Mechanical Characterization of B4C-Gr Al2618 Based Composites Synthesized by Stir Casting Method. Applied Science and Engineering Progress, 16(3), pp.6579-6579.

Ballupete Nagaraju S, Sathyanarayana K, Kodigarahalli Somashekara M, Dyavappanakoppalu Govindaswamy P, Puttegowda M, Mavinkere Rangappa S, Siengchin S. Artificial Neural Networks for Predicting Mechanical Properties of Al2219-B4c-Gr Composites with Multi-Ceramic Reinforcement. Karthik and Kodigarahalli Somashekara, Madhu and Dyavappanakoppalu Govindaswamy, Pradeep and Puttegowda, Madhu and Mavinkere Rangappa, Sanjay and Siengchin, Suchart, Artificial Neural Networks for Predicting Mechanical Properties of Al2219-B4c-Gr Composites with Multi-Ceramic Reinforcement.September 5, 2023. 
https://doi.org/10.1177/0954406223119603

Sharath, B. N., Madhu, K. S., Pradeep, D. G., Madhu, P., Premkumar, B. G., & Karthik, S. (2023). Effects of tertiary ceramic additives on the micro hardness and wear characteristics of Al2618+ Si3N4-B4C-Gr hybrid composites for automotive applications. Journal of Alloys and Metallurgical Systems, 100014.

Sharath BN, Karthik S, Madhu P, Madhu KS, Pradeep DG. Predictive Analysis of Slurry Erosion Behaviour in Aluminium-Based Hybrid Metal Matrix Composites: Experimental and Machine Learning Approach. Journal of Bio-and Tribo-Corrosion. 2023 Dec;9(4):70.  [Scopus Index]

Sharath BN, Madhu P, Verma A. Enhancing tribological performance: A review of ceramic reinforced aluminium hybrid composites for high-temperature engineering applications. Hybrid Advances. 2023 Oct 1:100094. 

Karthik S, Sharath BN, Madhu P, Madhu KS, Prem Kumar BG, Verma A. Experimental and artificial neural network-based slurry erosion behavior evaluation of cast iron. International Journal on Interactive Design and Manufacturing (IJIDeM). 2023 Nov 13:1-1.  [SCIE- Index]

Nagaraju SB, Somashekara MK, Govindaswamy PD, Puttegowda M, Girijashankar PB, Sathyanarayana K. Mechanical Characterization of B4C-Gr Al2618 Based Composites Synthesized by Stir Casting Method. Applied Science and Engineering Progress. 2023 Aug 23;16(3):6579-.[Scopus Index] 

Nagaraju SB, Sathyanarayana K, Somashekara MK, Pradeep DG, Puttegowda M, Verma A. Artificial neural networks for predicting mechanical properties of Al2219-B4C-Gr composites with multi reinforcements. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2023 Sep 5:09544062231196038.  [Scopus Index] 

Nagaraju SB, Somashekara MK, Govindaswamy PD, Puttegowda M, Shankar PB, Sathyanarayana K. Wear behaviour of hybrid (boron carbide-graphite) aluminium matrix composites under high temperature. Journal of Engineering and Applied Science. 2023 Dec;70(1):1-23.  [Scopus Index]

Pradeep DG, Nithin HS, Sharath BN, Madhu KS. Evaluation of dry sliding wear behavior of thermally sprayed and microwave post-processed TiO2 reinforced tungsten carbide composite coating. Welding in the World. 2023 Nov 9:1-3. [SCIE -index]

Kuldeep, B., Ravikumar, K. P., Guruprasad, B. S., Tasneem, H. A., Ashrith, H. S., Shree, N., ... & Ahamad, T. (2023). A novel composite connecting rod: study on mechanical and dynamic behaviour through experimental and finite element approach. Composites Part C: Open Access, 12, 100413.

Sharath BN, Madhu KS, Pradeep DG, Madhu P, Premkumar BG, Karthik S. High Temperature Tensile Behaviour of Ceramic-Hybridized Metal Matrix Composites for Above-Room-Temperature Applications. Silicon. 2023 Nov 10:1-2.

Pradeep DG, Nithin HS, Sharath BN, Madhu KS. Evaluation of dry sliding wear behavior of thermally sprayed and microwave post-processed TiO2 reinforced tungsten carbide composite coating. Welding in the World. 2023 Nov 9:1-3.

Sharath BN, Madhu KS, Pradeep DG, Madhu P, Premkumar BG, Karthik S. Effects of tertiary ceramic additives on the micro hardness and wear characteristics of Al2618+ Si3N4-B4C-Gr hybrid composites for automotive applications. Journal of Alloys and Metallurgical Systems. 2023 May 31:100014. 

Sharath BN, Madhu KS, Pradeep DG, Madhu P, Premkumar BG, Karthik S. “Conjectured hybrid power with artificial intelligence and single-axis solar tracking wind turbine”. International Journal of Energy and Water Resources. 2023 Jan 24:1-7. 

TG YG, Ballupete Nagaraju S, Puttegowda M, Verma A, Rangappa SM, Siengchin S. Biopolymer-Based Composites: An Eco-Friendly Alternative from Agricultural Waste Biomass. Journal of Composites Science. 2023 Jun 11;7(6):242. [SCIE- index] 

7th International conference on sustainable materials and recent trends in Mechanical Engineering (SMARTME-2023), “ PLC Controlled Assembly Automation for spot welding”, 11th& 12th August 2023 at REVA University Banglore.

Jagadeesh, P., Rangappa, S.M., Suyambulingam, I., Siengchin, S., Puttegowda, M., Binoj, J.S., Gorbatyuk, S., Khan, A., Doddamani, M., Fiore, V. and Cuadrado, M.M.M., 2023. Drilling characteristics and properties analysis of fiber reinforced polymer composites: A comprehensive review. Heliyon.

Patil, M.B., Rajamani, S.B., Mathad, S.N., Patil, A.Y., Hussain, M.A., Alorfii, H.S., Khan, A., Asiri, A.M., Khan, I. and Puttegowda, M., 2022. Microwave-assisted synthesis of poly (acrylamide-co-2-hydroxyethyl methacrylate)/chitosan semi-IPN ZnO nanocomposite membranes for food packaging applications. Journal of Materials Research and Technology, 20, pp.3537-3548.

Madhu, P., Sanjay, M.R., Khan, A., Otaibi, A.A., Al-Zahrani, S.A., Pradeep, S., Yogesha, B., Boonyasopon, P. and Siengchin, S., 2022. Hybrid effect of PJFs/E-glass/carbon fabric reinforced hybrid epoxy composites for structural applications. Journal of Natural Fibers, 19(10), pp.3742-3752.

Jagadeesh, P., Mavinkere Rangappa, S., Siengchin, S., Puttegowda, M., Thiagamani, S.M.K., Hemath Kumar, M., Oladijo, O.P., Fiore, V. and Moure Cuadrado, M.M., 2022. Sustainable recycling technologies for thermoplastic polymers and their composites: A review of the state of the art. Polymer Composites, 43(9), pp.5831-5862.

Puttegowda, M., Rangappa, S.M., Khan, A., Al-Zahrani, S.A., Otaibi, A.A., Shivanna, P., Liu, Y. and Siengchin, S., 2022. Effect of layering sequence on impact properties of alkali treated phoenix pusilla fibers-glass-carbon fabrics reinforced hybrid composite laminates. Journal of Natural Fibers, 19(13), pp.6878-6888.

Manimaran, P., Vignesh, V., Khan, A., Pillai, G.P., Nagarajan, K.J., Prithiviraj, M., Al-Romaizan, A.N., Hussein, M.A., Puttegowda, M. and Asiri, A.M., 2022. Extraction and characterization of natural lignocellulosic fibres from Typha angustata grass. International Journal of Biological Macromolecules, 222, pp.1840-1851.

Ballupete Nagaraju, S., Kodigarahalli Somashekara, M., Puttegowda, M., Manjulaiah, H., Kini, C.R. and Channarayapattana Venkataramaiah, V., 2022. Effect of B4C/Gr on Hardness and Wear Behavior of Al2618 Based Hybrid Composites through Taguchi and Artificial Neural Network Analysis. Catalysts, 12(12), p.1654.

Sharath, B.N., Madhu, K.S., Pradeep, D.G., Madhu, P., Premkumar, B.G. and Karthik, S., 2023. Conjectured hybrid power with artificial intelligence and single-axis solar tracking wind turbine. International Journal of Energy and Water Resources, pp.1-7.

Arpitha, G.R., Mohit, H., Madhu, P. and Verma, A., 2023. Effect of sugarcane bagasse and alumina reinforcements on physical, mechanical, and thermal characteristics of epoxy composites using artificial neural networks and response surface methodology. Biomass Conversion and Biorefinery, pp.1-19.

Yashas Gowda, T.G., Vinod, A., Madhu, P., Sanjay, M.R., Siengchin, S. and Jawaid, M., 2022. Areca/Synthetic fibers reinforced based epoxy hybrid composites for semi‐structural applications. Polymer Composites, 43(8), pp.5222-5234.

Sharath, B. N., Madhu, K. S., Pradeep, D. G., Madhu, P., Premkumar, B. G., & Karthik, S. (2023). Conjectured hybrid power with artificial intelligence and single-axis solar tracking wind turbine. International Journal of Energy and Water Resources, 1-7.,

TG, Y.G., P, M., Mavinkere Rangappa, S., Siengchin, S. and Jawaid, M., 2022. Mechanical and thermal properties of flax/carbon/kevlar based epoxy hybrid composites. Polymer Composites, 43(8), pp.5649-5662.

Nagaraju SB, Sathyanarayana K, Somashekara MK, Pradeep DG, Puttegowda M, Verma A. Artificial neural networks for predicting mechanical properties of Al2219-B4C-Gr composites with multireinforcements. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2023 Sep 5:09544062231196038.

A Review on the Fabrication and Mechanical Characterization of Fibrous Composites for Engineering Applications

3D Printing of Crystalline Polymers

Pradeesh, E. L., Udhayakumar, S., Vasundhara, M. G., & Kalavathi, G. K. (2022). A review on piezoelectric energy harvesting. Microsystem Technologies, 28(8), 1797–1830. https://doi.org/10.1007/S00542-022-05334-4/FIGURES/1

Madhu KS, Venkatesh CV, Sharath B.N, Karthik S. “Characterization and Evaluation of Mechanical Properties of Al-Zn Based Hybrid Metal Matrix Composites”. Applied Science and Engineering Progress. 2022 Nov 2;16(1):5804-.  [Scopus Index] 

1. Sharath BN, Karthik S, Madhu P, Madhu KS, Pradeep DG. Predictive Analysis of Slurry Erosion Behaviour in Aluminium-Based Hybrid Metal Matrix Composites: Experimental and Machine Learning Approach. Journal of Bio-and Tribo-Corrosion. 2023 Dec;9(4):70. https://doi.org/10.1007/s40735-023-00793-2

1. Sharath BN, Madhu KS, Pradeep DG, Madhu P, Premkumar BG, Karthik S. Conjectured hybrid power with artificial intelligence and single-axis solar tracking wind turbine. International Journal of Energy and Water Resources. 2023 Jan 24:1-7. https://doi.org/10.1007/s42108-023-00234-3

1. Sharath B N, Madhu K S, Pradeep D G, Madhu P, Premkumar B G, Karthik S. Effects of tertiary ceramic additives on the micro hardness and wear characteristics of Al2618+ Si3N4-B4C-Gr hybrid composites for automotive applications. Journal of Alloys and Metallurgical Systems. 2023 May 31:100014.  https://doi.org/10.1016/j.jalmes.2023.100014

1. Sharath B N, Madhu K S, Pradeep D G, Madhu P, Premkumar B G, Karthik S. Conjectured hybrid power with artificial intelligence and single-axis solar tracking wind turbine. International Journal of Energy and Water Resources. 2023 Jan 24:1-7. https://doi.org/10.1007/s42108-023-00234-3.

1. Nithin H S, Nishchitha K M, Pradeep D G, Durga C P, Mathapati M. Comparative analysis of CoCrAlY coatings at high-temperature oxidation behavior using different reinforcement composition profiles. Welding in the World. 2023 Mar;67(3):585-92. https://doi.org/10.1007/s40194-022-01405-2  Science Citation Index Expanded (SCIE) ISBN: 00432288

1. Sharath B N, Karthik S, Pradeep D G, Madhu K S, Venkatesh C V. Machinability Studies on Boron Carbide and Graphite Reinforced Al7029-Based Hybrid Composites. InMaterials, Design and Manufacturing for Sustainable Environment 2023 (pp. 511-522). Springer, Singapore. https://doi.org/10.1007/978-981-19-3053-9_38 [Scopus Index] ISBN: 978-981-19-3053-9.

1. Pradeep DG, Venkatesh CV. “Evaluation of High Temperature Dry Sliding Wear Behaviour of Thermal Sprayed and Microwave Fused WC12Co and CeO2 Modified WC12Co Composite Coatings”. Applied Science and Engineering Progress, Vol. 16, No. 1, 2023, 5846. https://doi.org/10.14416/j.asep.2022.03.007. [Scopus Index]

Jagadeesh, P., Puttegowda, M., Thyavihalli Girijappa, Y.G., Rangappa, S.M. and Siengchin, S., 2022. Effect of natural filler materials on fiber reinforced hybrid polymer composites: An Overview. Journal of Natural Fibers, 19(11), pp.4132-4147.

Madhu P, Sanjay MR, Khan A, Otaibi AA, Al-Zahrani SA, Pradeep S, Yogesha B, Boonyasopon P, Siengchin S. Hybrid effect of PJFs/E-glass/carbon fabric reinforced hybrid epoxy composites for structural applications. Journal of Natural Fibers. 2022 Oct 3;19(10):3742-52.

Sanjay Mavinkere Rangappa, Jyotishkumar Parameswaranpillai, Yashas Gowda T G, Suchart Siengchin, M. Ozgur Seydibeyoglu “Nanoparticle-Based Polymer Composites” Woodhead Publishing Series in Composites Science and Engineering. Elsevier Inc.

Bharath KN, Puttegowda M, Yashas Gowda TG, Arpitha GR, Pradeep S, Rangappa SM, Siengchin S. Development of banana fabric incorporated polymer composites for printed circuit board application. Biomass Conversion and Biorefinery. 2023 Apr 29:1-4.

Kuldeep B, Ravikumar KP, Pradeep S, Gopi KR, Tasneem HA, Manu SS. Investigation on the dynamic behaviour and corrosion characteristics of hexagonal boron nitride (h-BN) and zirconium dioxide (ZrO2) reinforced Al7075 composite. Journal of Alloys and Metallurgical Systems. 2023 Mar 1;1:100004.

Jagadeesh P, Puttegowda M, Thyavihalli Girijappa YG, Shivanna P, Mavinkere Rangappa S, Siengchin S. Investigations on physical, mechanical, morphological and water absorption properties of ramie/hemp/kevlar reinforced vinyl ester hybrid composites. Journal of Vinyl and Additive Technology. 2023 Apr 24.

Divya H. V., Jeevan T P, H. S. Ashrith, Rudresh B. M. “Effect of wood filler on the mechanical and thermal behavior of polypropylene/short glass/short carbon fiber-reinforced hybrid composites” 2022/7, Volume 44, issue 7, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer Berlin Heidelberg.

Sathyanarayana K, Puttegowda M, Rangappa SM, Siengchin S, Shivanna P, Nagaraju SB, Somashekara MK, Girijashankar PB, Girijappa YG. Metallic lightweight materials: properties and their applications. InLightweight and Sustainable Composite Materials 2023 Jan 1 (pp. 47-67). Woodhead Publishing.

Nagaraju SB, Priya HC, Girijappa YG, Puttegowda M. Lightweight and sustainable materials for aerospace applications. InLightweight and Sustainable Composite Materials 2023 Jan 1 (pp. 157-178). Woodhead Publishing.

Jagadeesh P, Puttegowda M, Girijappa YG, Sathyanarayana K, Rangappa SM, Siengchin S, Hassan SA. Lightweight and sustainable materials for structural applications. InLightweight and Sustainable Composite Materials 2023 Jan 1 (pp. 197-217). Woodhead Publishing.

National Conference on Emerging Technologies in Engineering”(NCETE-2023), “ PLC Controlled Assembly Automation for spot welding work station”, conducted on 12th May 2023, at Navkis College of Engineering, Hassan, In Association with IEEE,IETE and CSI Student.

A novel study on development of sisal – jute fibre epoxy filler-based composites for brake pad application, Journal of Biomass conversion and Biorefinery, April -2023, 1 - 13.

Investigating the adhesion strength of electrodeposited Ni-Al2O3 nano composite on Al-2618 substrate by using the scratch test technique

Machinability Studies on Boron Carbide and Graphite Reinforced Al7029-Based Hybrid Composites

Characterization and Evaluation of Mechanical Properties of Al-Zn Based Hybrid Metal Matrix Composites

Bharath, K.N., Puttegowda, M., Mavinkere Rangappa, S., Basavarajappa, S., Siengchin, S., Khan, A. and Gorbatyuk, S.M., 2023. Study of Treatment Effect on the Cocos Nucifera Lignocellulosic Fibers as Alternative for Polymer Composites. Journal of Natural Fibers, 20(1), p.2134257.

Yashas Gowda T.G , Sanjay Mavinkere Rangappa , Suchart Siengchin , and Jyotishkumar Parameswaranpillai “Introduction to nanoparticle-based materialsand their composites” “Nanoparticle-Based Polymer Composites” Woodhead Publishing Series in Composites Science and Engineering.

Praveenkumara Jagadeesha, Madhu Puttegowda, Yashas Gowda Thyavihalli Girijappa, Sanjay Mavinkere Rangappa, and Suchart Siengchin “Effect of natural filler materials on fiber reinforced hybrid polymer composites: An Overview” Journal Of Natural Fibers 2022, VOL. 19, NO. 11, 4132–4147 

Sreenivas Huligere Thimmaiah,Krishnamurthy Narayanappa, Yashas Thyavihalli Girijappa, Arpitha Gulihonenahali Rajakumara,Mohit Hemath,Senthil Muthu Kumar Thiagamani,Akarsh Verma “An artificial neural network and Taguchi prediction on wear characteristics of Kenaf–Kevlar fabric reinforced hybridpolyester composites” PolymerComposites.

Bharath, K.N., Puttegowda, M., Yashas Gowda, T.G., Arpitha, G.R., Pradeep, S., Rangappa, S.M. and Siengchin, S., 2023. Development of banana fabric incorporated polymer composites for printed circuit board application. Biomass Conversion and Biorefinery, pp.1-14.

Jagadeesh, P., Puttegowda, M., Thyavihalli Girijappa, Yashas Gowda., Shivanna, P., Mavinkere Rangappa, S. and Siengchin, S., 2023. Investigations on physical, mechanical, morphological and water absorption properties of ramie/hemp/kevlar reinforced vinyl ester hybrid composites. Journal of Vinyl and Additive Technology.

Ballupete Nagaraju S, Kodigarahalli Somashekara M, Puttegowda M, Manjulaiah H, Kini CR, Channarayapattana Venkataramaiah V. Effect of B4C/Gr on Hardness and Wear Behavior of Al2618 Based Hybrid Composites through Taguchi and Artificial Neural Network Analysis. Catalysts. 2022 Dec 15;12(12):1654.  [SCIE- Index] 

TG, Y.G., Ballupete Nagaraju, S., Puttegowda, M., Verma, A., Rangappa, S.M. and Siengchin, S., 2023. Biopolymer-Based Composites: An Eco-Friendly Alternative from Agricultural Waste Biomass. Journal of Composites Science, 7(6), p.242.

Sharath, B.N., Madhu, K.S., Pradeep, D.G., Madhu, P., Premkumar, B.G. and Karthik, S., 2023. Effects of tertiary ceramic additives on the micro hardness and wear characteristics of Al2618+ Si3N4-B4C-Gr hybrid composites for automotive applications. Journal of Alloys and Metallurgical Systems, p.100014.

Bharath, K.N., Puttegowda, M., Yashas Gowda, T.G., Arpitha, G.R., Pradeep, S., Rangappa, S.M. and Siengchin, S., 2023. Development of banana fabric incorporated polymer composites for printed circuit board application. Biomass Conversion and Biorefinery, pp.1-14.

Manjulaiah, H., Dhanraj, S., Basavegowda, Y., Lamani, L.N., Puttegowda, M., Rangappa, S.M. and Siengchin, S., 2023. A novel study on the development of sisal-jute fiber epoxy filler–based composites for brake pad application. Biomass Conversion and Biorefinery, pp.1-13.

Jagadeesh, P., Puttegowda, M., Thyavihalli Girijappa, Y.G., Shivanna, P., Mavinkere Rangappa, S. and Siengchin, S., 2023. Investigations on physical, mechanical, morphological and water absorption properties of ramie/hemp/kevlar reinforced vinyl ester hybrid composites. Journal of Vinyl and Additive Technology.

Ain Q. U., Ashrith H. S., Singh M. K., & Jeevan T. P. (2022). Containers with Lubricating Agents for Friction and Wear. In Micro-and Nano-containers for Smart Applications (pp. 243-263). Springer, Singapore. 

Divya, H. V., Jeevan, T. P., Ashrith, H. S., & Rudresh, B. M. (2022). Effect of wood filler on the mechanical and thermal behavior of polypropylene/short glass/short carbon fiber-reinforced hybrid composites. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(7), 1-19. (Springer, SCIE, IF= 2.220)

Pradeep DG, Nithin HS, Sharath BN, Madhu KS, Venkatesh CV. “Microstructure and Wear Behavior of Microwave Treated WC-10Co-4Cr Composite Coating on AISI 4140 Alloy Steel”. In IOP Conference Series: Materials Science and Engineering 2021 Oct 1 (Vol. 1189, No. 1, p. 012012). IOP Publishing. [Scopus Index].

Sangeetha, P., Nageshwari, M., Kumari, C.R.T., Srividhya, S., Vinitha, G., Mathubala, G., Manikandan, A., Caroline, M.L., Khan, A., Alorfi, H.S. and Hussein, M.A., 2022. Growth and characterization of second and third order acentric studies of L-phenylalanine L-phenylalaninium malonate single crystal. Crystals, 12(6), p.869.

Jagadeesh, P., Puttegowda, M., Rangappa, S.M., Alexey, K., Gorbatyuk, S., Khan, A., Doddamani, M. and Siengchin, S., 2022. A comprehensive review on 3D printing advancements in polymer composites: technologies, materials, and applications. The International Journal of Advanced Manufacturing Technology, 121(1-2), pp.127-169.

Yashas Gowda, T.G., Madhu, P., Kushvaha, V., Rangappa, S.M. and Siengchin, S., 2022. Comparative evaluation of areca/carbon/basalt fiber reinforced epoxy/bio epoxy based hybrid composites. Polymer Composites, 43(7), pp.4179-4190.

Praveenkumara, J., Madhu, P., Yashas Gowda, T.G., Sanjay, M.R. and Siengchin, S., 2022. A comprehensive review on the effect of synthetic filler materials on fiber-reinforced hybrid polymer composites. The Journal of the Textile Institute, 113(7), pp.1231-1239.

T. P. Jeevan, S. R. Jayaram, Asif Afzal, H. S. Ashrith, Manzoore Elahi M. Soudagar & M. A. Mujtaba (2021), Machinability of AA6061 aluminium alloy and AISI 304L stainless steel using nonedible vegetable oils applied as minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 

Ashrith H S and Mrityunjay Doddamani (2021). Point angle effect on drilling of closed cell foams. Composites Part C: Open Access.

Kangokar Mukesh, S., Bettagowda, N., Praveenkumara, J., Thyavihalli Girijappa, Y.G., Puttegowda, M., Mavinkere Rangappa, S., Siengchin, S. and Gorbatyuk, S., 2022. Influence of stacking sequence on flax/kevlar hybrid epoxy composites: Mechanical and morphological studies. Polymer Composites, 43(6), pp.3782-3793.

Pradeep DG, Sharath BN, Madhu KS, Karthik S, Venkatesh CV. “Investigating the adhesion strength of electrodeposited Ni-Al2O3 nano composite on Al-2618 substrate by using the scratch test technique”. Materials Today: Proceedings. 2021 Dec 1.  [Scopus Index]

Sharath B.N, Jeevan TP, et. al. “Machinability studies on boron carbide and graphite reinforced aluminium hybrid composites”. Materials Today: Proceedings. 2021 Apr 23.  [Scopus Index] 

Sharath BN, Venkatesh CV et. al “Study on effect of ceramics on dry sliding wear behaviour of Al-Cu-Mg based metal matrix composite at different temperature”. Materials Today: Proceedings. 2021.   [Scopus Index]

Sharath B.N, and Venkatesh C V. 2021. “Study On Effect of Boron Carbide, Aluminium Oxide and Graphite on Dry Sliding Wear Behaviour of Aluminium Based Metal Matrix Composite at Different Temperature”. Tribologia - Finnish Journal of Tribology 38 (1−2):35−46.  [Scopus Index] 

Sharath B.N, Venkatesh CV, et. al “Multi Ceramic Particles Inclusion in the Aluminium Matrix and Wear Characterization through Experimental and Response Surface-Artificial Neural Networks”. Materials. 2021 Jan;14(11):2895.  [SCIE-Index] 

Containers with Lubricating Agents for Friction and Wear

Machinability of AA6061 aluminum alloy and AISI 304L stainless steel using nonedible vegetable oils applied as minimum quantity lubrication

Yashas Gowda T G,Vinod.A, Madhu P, Sanjay M R, SuchartSiengchin and Mohammad Jawaid “Mechanical and thermal properties of flax /carbon/kevlar based epoxyhybrid composites” Polymer Composites, 2022. 

Jagadeesh, P., Puttegowda, M., Girijappa, Y.G.T., Rangappa, S.M. and Siengchin, S., 2022. Carbon fiber reinforced areca/sisal hybrid composites for railway interior applications: Mechanical and morphological properties. Polymer Composites, 43(1), pp.160-172.

Jagadeesh, P., Ningappa, V.S.H., Puttegowda, M., Girijappa, Y.G.T., Rangappa, S.M., Khan, M.R., Khan, I. and Siengchin, S., 2021. Pongamia pinnata shell powder filled sisal/kevlar hybrid composites: Physicomechanical and morphological characteristics. Polymer Composites, 42(9), pp.4434-4447.

Puttegowda, M., Pulikkalparambil, H. and Rangappa, S.M., 2021. Trends and developments in natural fiber composites. Applied Science and Engineering Progress, 14(4), pp.543-552.

Kumari, C.R.T., Al Otaibi, A., Kamaraj, T., Nageshwari, M., Mathubala, G., Manikandan, A., Caroline, M.L., Sudha, S., Kashmery, H.A., Madhu, P. and Khan, A., 2021. A Brief Study on Optical and Mechanical Properties of an Organic Material: Urea Glutaric Acid (2/1)—A Third Order Nonlinear Optical Single Crystal. Crystals, 11(10), p.1239.

Sri, V.S.P.S., Manikandan, A., Mathankumar, M., Tamizhselvi, R., George, M., Murugaiah, K., Kashmery, H.A., Al-Zahrani, S.A., Puttegowda, M., Khan, A. and Asiri, A.M., 2021. Unveiling the photosensitive and magnetic properties of amorphous iron nanoparticles with its application towards decontamination of water and cancer treatment. Journal of Materials Research and Technology, 15, pp.99-118.

Kabeerdass, N., Al Otaibi, A., Rajendran, M., Manikandan, A., Kashmery, H.A., Rahman, M.M., Madhu, P., Khan, A., Asiri, A.M. and Mathanmohun, M., 2021. Bacillus-mediated silver nanoparticle synthesis and Its antagonistic activity against bacterial and fungal pathogens. Antibiotics, 10(11), p.1334.

Jagadeesh, P., Puttegowda, M., Mavinkere Rangappa, S. and Siengchin, S., 2021. Influence of nanofillers on biodegradable composites: A comprehensive review. Polymer composites, 42(11), pp.5691-5711.

Jagadeesh, P., Puttegowda, M., Mavinkere Rangappa, S. and Siengchin, S., 2021. A review on extraction, chemical treatment, characterization of natural fibers and its composites for potential applications. Polymer Composites, 42(12), pp.6239-6264.

Ansari, A., Siddiqui, V.U., Akram, M.K., Siddiqi, W.A., Khan, A., Al-Romaizan, A.N., Hussein, M.A. and Puttegowda, M., 2021. Synthesis of atmospherically stable zero-valent iron nanoparticles (nZVI) for the efficient catalytic treatment of high-strength domestic wastewater. Catalysts, 12(1), p.26.

Yashas Gowda T G,Vinod.A, Madhu P, Sanjay M R, SuchartSiengchin and MohammadJawaid “Areca/synthetic fibers reinforced based epoxy hybridcomposites for semi‐structural applications” Polymer Composites, 2022, 

Patil, M., Mathad, S.N., Patil, A.Y., Arshad, M.N., Alorfi, H.S., Puttegowda, M., Asiri, A.M., Khan, A. and Azum, N., 2022. Synthesis and Characterization of Microwave-Assisted Copolymer Membranes of Poly (vinyl alcohol)-g-starch-methacrylate and Their Evaluation for Gas Transport Properties. Polymers, 14(2), p.350.

Muthuppalani, M., Otaibi, A.A., Balasubramaniyan, S., Manikandan, S., Manimaran, P., Mathubala, G., Manikandan, A., Arshad, M.N., Puttegowda, M., Alorfi, H.S. and Khan, A., 2022. Synthesis, Characterization and Bio-Potential Activities of Co (II) and Ni (II) Complexes with O and N Donor Mixed Ligands. Crystals, 12(3), p.326.

Jagadeesh, P., Puttegowda, M., Oladijo, O.P., Lai, C.W., Gorbatyuk, S., Matykiewicz, D., Rangappa, S.M. and Siengchin, S., 2022. A comprehensive review on polymer composites in railway applications. Polymer Composites, 43(3), pp.1238-1251.

Bharath, K.N., P, M., Mavinkere Rangappa, S., Siengchin, S., Alexey, K. and Gorbatyuk, S., 2022. Waste coconut leaf sheath as reinforcement composite material with phenol‐formaldehyde matrix. Polymer Composites, 43(4), pp.1985-1995.

Khan, A., Puttegowda, M., Jagadeesh, P., Marwani, H.M., Asiri, A.M., Manikandan, A., Khan, A.A.P., Ashraf, G.M., Rangappa, S.M. and Siengchin, S., 2022. Review on Nitride compounds and its polymer composites: A multifunctional material. Journal of Materials Research and Technology, 18, pp.2175-2193.

Jagadeesh, P., Puttegowda, M., Boonyasopon, P., Rangappa, S.M., Khan, A. and Siengchin, S., 2022. Recent developments and challenges in natural fiber composites: A review. Polymer Composites, 43(5), pp.2545-2561.

Ajeesha, T.L., Manikandan, A., Anantharaman, A., Jansi, S., Durka, M., Almessiere, M.A., Slimani, Y., Baykal, A., Asiri, A.M., Kasmery, H.A. and Khan, A., 2022. Structural investigation of Cu doped calcium ferrite (Ca1-xCuxFe2O4; x= 0, 0.2, 0.4, 0.6, 0.8, 1) nanomaterials prepared by co-precipitation method. Journal of Materials Research and Technology, 18, pp.705-719.

Jagadeesh, P., Puttegowda, M., Rangappa, S.M. and Siengchin, S., 2022. Role of polymer composites in railway sector: an overview. Applied Science and Engineering Progress, 15(2), pp.5745-5745.

Jagadeesh P, Puttegowda M, Girijappa YG, Rangappa SM, Gupta MK, Siengchin S. Mechanical, electrical and thermal behaviour of additively manufactured thermoplastic composites for high performance applications. Additive and subtractive manufacturing of composites. 2021:167-99.

Effect of fiber orientation on the mechanical properties of unidirectional basalt fiber reinforced polymer matrix composites

Investigation of mechanical properties of ECAP processed AL7068 aluminium alloy

Study on mechanical properties of AZ91 magnesium alloy

Synthesis of nanostructured ternary Ti based alloy for bio-medical applications

Impact of heat treatment on the mechanical performance of hot extruded Al6061-BN reinforced metal matrix composites, Bulletin of the Polish Academy of Sciences: Technical Sciences, June - 2021, 137014 -137014.

Rangappa SM, Puttegowda M, Parameswaranpillai J, Siengchin S, Ozbakkaloglu T, Wang H. Introduction to plant fibers and their composites. InPlant Fibers, their Composites, and Applications 2022 Jan 1 (pp. 1-24). Woodhead Publishing.

Madhu P, Praveenkumara J, Sanjay MR, Siengchin S, Gorbatyuk S. Introduction to bio-based fibers and their composites. InAdvances in Bio-Based Fiber 2022 Jan 1 (pp. 1-20). Woodhead Publishing.

Girijappa YG, Ayyappan V, Puttegowda M, Rangappa SM, Parameswaranpillai J, Siengchin S. Plastics in automotive applications.

Effect of processing route on grain refinement and mechanical properties in equal channel angular pressing of aluminium alloy AA7068

Investigation of mechanical properties of ECAP processed AL7068 aluminium alloy

BS Shivashankara, KR Gopi, S Pradeep, RR Rao

IOP Conference Series: Materials Science and Engineering 1189 (1), 012027

Effect of processing route on grain refinement and mechanical properties in equal channel angular pressing of aluminium alloy AA7068

BKV B. S. Shivashankara, K. R. Gopi, S. Pradeep, R. Raghavendra Rao

Journal of Mines, Metals and Fuels 69 (12A), 1-7

Effect of fiber orientation on the mechanical properties of unidirectional basalt fiber reinforced polymer matrix composites

RR Rao, S Pradeep, BS Shivashankara, S Avinash, NB Pradeep

Journal of Mines, Metals and Fuels, 97-101

Effect of cenosphere on moisture absorption performance of woven hybrid bamboo-glass fiber reinforced epoxy composites

BK Venkatesha, TD Kumar, P K P, BS Shivashankara, L Yuvaraj, ...

Journal of Mines, Metals and Fuels, 24-30

MECHANICAL PROPERTY ENHANCEMENT OF ALUMINIUM ALLOY AA 7068 PROCESSED THROUGH AN EFFECTIVE GRAIN REFINEMENT PROCESS CALLED ECAP

B S Shivashankara, K R Gopi, S Pradeep

International Journal of Engineering Applied Sciences and Technology 6 (6 …

Experimental Investigation of effect of hybridization of UHMWPE fibers on the mechanical and physical properties of Basalt fiber reinforced polymer matrix composites

RR Rao, S Pradeep, S Karthik, KR Gopi, BS Shivashankara

IOP Conference Series: Materials Science and Engineering 1189 (1), 012025

43rd World Conference on Applied Science,

Engineering & Technology (WCASET-2022)” is going to take place on 29th – 30th December 2022

Tribological Suitability of aluminium hybrid composite above atmospheric temperature

Yashas Gowda T G, Madhu P, Vinod Kushvaha, Sanjay M R and Suchart Siengchin, “Comparative evaluation of areca/carbon/basalt fiber reinforced epoxy/bio epoxy- based hybrid composites” Polymer Composites, 2022, 1.

Kangokar Mukesh, Sathvik,Nuthan Bettagowda, JagadeeshPraveenkumara, YashasGowda Thyavihalli Girijappa, Madhu Puttegowda, Sanjay Mavinkere Rangappa,Suchart Siengchin, and Sergey Gorbatyuk. "Influence of stacking sequenceon flax/kevlar hybrid epoxy composites: Mechanical and morphological studies." Polymer Composites. 2022, 

Vinod, A., JirattiTengsuthiwat, Yashas Gowda, R. Vijay, M. R. Sanjay,Suchart Siengchin, and Hom Nath Dhakal. "Jute/Hemp bio-epoxyhybrid bio-composites: Influence of stacking sequence on adhesion of fiber-matrix." International Journal of Adhesionand Adhesives 113 (2022), 

Jagadeesh, Praveenkumara, Madhu Puttegowda, Yashas Gowda Thyavihalli Girijappa, SanjayMavinkere Rangappa, and Suchart Siengchin. "Carbon fiber reinforced areca/sisal hybrid composites for railway interiorapplications: Mechanical and morphological properties." Polymer Composites 43, no. 1 (2022): 160-172.

Jagadeesh, Praveenkumara, Vidya Sagar Honnenahally Ningappa, Madhu Puttegowda, Yashas Gowda Thyavihalli Girijappa, Sanjay MavinkereRangappa, Mohammad Rizwan Khan, Imran Khan, and Suchart Siengchin. "Pongamia pinnata shell powder filled sisal/kevlar hybrid composites: Physicomechanical and morphological characteristics." Polymer Composites 42, no. 9 (2021): 4434-4447. 

Praveenkumara, J., P. Madhu, T. G. Yashas Gowda, M. R. Sanjay,and Suchart Siengchin. "A comprehensive review on the effect of synthetic filler materials on fiber-reinforced hybrid polymer composites." The Journal of the TextileInstitute (2021): 1-9. 

Yashas Gowda T G, Vinod.A, Madhu P, Vinod Kushvaha, Sanjay M R and Suchart Siengchin“A new study on flax‐basalt‐carbon fiber reinforced epoxy/bioepoxy hybrid composites” Polymer Composites, 2021, 

Effect of boron carbide on wear resistance of graphite containing Al7029 based hybrid composites and its dry sliding wear characterization through experimental, response …

Effect of wood filler on the mechanical and thermal behavior of polypropylene/short glass/short carbon fiber-reinforced hybrid composites

Microstructure and wear behavior of microwave treated WC-10Co-4Cr composite coating on AISI 4140 alloy steel

Evaluation of mechanical properties of ceramic reinforced aluminium-7029 hybrid composite

Experimental Investigation of effect of hybridization of UHMWPE fibers on the mechanical and physical properties of Basalt fiber reinforced polymer matrix composites

Comparative Study of the Mechanical and Water Absorption Behaviour of Basalt Fiber Reinforced Polymer Matrix Composites with Different Epoxies as Matrix for Biomedical Applications

Rao RR, Pradeep S, Karthik S, Gopi KR, Shivashankara BS. Experimental Investigation of effect of hybridization of UHMWPE fibers on the mechanical and physical properties of Basalt fiber reinforced polymer matrix composites. InIOP Conference Series: Materials Science and Engineering 2021 Oct 1 (Vol. 1189, No. 1, p. 012025). IOP Publishing.

Raghavendra Rao R, Pradeep S, Hasan N, Shivashankara BS, Elkotb MA, Ahamed Saleel C, Afzal A, Saleh B. Comparative Study of the Mechanical and Water Absorption Behaviour of Basalt Fiber Reinforced Polymer Matrix Composites with Different Epoxies as Matrix for Biomedical Applications. Advances in Materials Science and Engineering. 2021 Dec 22;2021:1-9.

Shivashankara BS, Gopi KR, Pradeep S, Rao RR. Investigation of mechanical properties of ECAP processed AL7068 aluminium alloy. InIOP Conference Series: Materials Science and Engineering 2021 Oct 1 (Vol. 1189, No. 1, p. 012027). IOP Publishing.

Ajith B S Hanumantharaya R, Prem kumar B G, “a critical review on nanoparticle filled adhesives for structural application”, journal of mines, metals and fuels, Volume 70,Issue 10A, 84-89, 2022

Madhu, K. S., C. V. Venkatesh, Sharath B. N, and S. Karthik. "Effect of Boron Carbide on wear resistance of graphite containing Al7029 Based Hybrid Composites and its Dry Sliding Wear Characterization Through Experimental, Response Surface Method and ANOVA." Tribologia-Finnish Journal of Tribology 38, no. 3− 4 (2021): 48-60.[Scopus Index] 

Sharath B.N, Madhu KS, Pradeep DG, Venkatesh CV. “Tribological Suitability of aluminium hybrid composite above atmospheric temperature”. In IOP Conference Series: Materials Science and Engineering 2021 Oct 1 (Vol. 1189, No. 1, p. 012018). IOP Publishing.[Scopus Index]

Ashrith, H. S., Jeevan, T. P., & Doddamani, M. (2021). Experimental investigation on the machinability characteristics in drilling of syntactic foams. In IOP Conference Series. Materials Science and Engineering, 1189(1).

Pradeesh, E. L., Udhayakumar, S., Vasundhara, M. G., & Nijandhan, K. (2021). Design and development of frequency tuneable vibration based piezoelectric energy harvester. https://doi.org/10.1080/00150193.2021.1984779

B.N. Sharath, T.P. Jeevan, Maughal Ahmed Ali Baig, H.S. Ashrith, Asif Afzal, Avala Raji Reddy (2021). Machinability studies on boron carbide and graphite reinforced aluminium hybrid composites. Materials Today: Proceedings, 46 (17), 8734-8741; (Scopus).

Sharath, B.N., Madhu, K.S. and Venkatesh, C.V., 2019. “Experimental Study on Dry Sliding Wear Behaviour of Al-B4C-Gr Metal Matrix Composite at Different Temperatures”. J. Applied Mechanics and Materials, 895, pp. 96-101. 

1. Pradeep DG, Venkatesh CV., Review on Tribological and Mechanical Behavior in HVOF Thermal-sprayed Composite Coatings. Journal of Bio-and Tribo-Corrosion. 2022 Mar;8(1):1-9. https://doi.org/10.1007/s40735-022-00631-x. [Scopus Index]

Chikkegouda SP, Gurudath B, Sharath B.N, Karthik S, Mahale RS "Mechanical and Tribological Characteristics of Aluminium 2618 Matrix Composite Reinforced with Boron Carbide." Bio interface Research in Applied Chemistry 2021. Volume 12, Issue 4, 2022, 4544 – 4556.  [Scopus Index] 

Pradeep DG, Sharath B.N, “Study on scratch behavior of Ni-Al2O3 coating composition on Al-2219 substrate by electro deposited technique”. Materials Today: Proceedings. 2021 May 4.  [Scopus Index] 

Rao, R. Raghavendra, S. Pradeep, S. Karthik, K. R. Gopi, and B. S. Shivashankara "Experimental Investigation of effect of hybridization of UHMWPE fibers on the mechanical and physical properties of Basalt fiber reinforced polymer matrix composites", IOP Conference Series: Materials Science and Engineering, 2021, 1189, 012025.

Madhu K.S, Sharath B.N, Venkatesh CV, Pradeep DG. “Evaluation of Mechanical Properties of Ceramic Reinforced Aluminium-7029 Hybrid Composite”. In IOP Conference Series: Materials Science and Engineering 2021 Oct 1 (Vol. 1189, No. 1, p. 012019). IOP Publishing. [Scopus Index] 

  Shivashankara, B. S., K. R. Gopi, S. Pradeep, and R. Raghavendra Rao "Investigation of mechanical properties of ECAP processed AL7068 aluminium alloy", IOP Conference Series: Materials Science and Engineering, 2021, 1189, 012027.

Rangappa SM, Puttegowda M, Parameswaranpillai J, Siengchin S, Gorbatyuk SM, editors. Advances in Bio-Based Fiber: Moving Towards a Green Society. Woodhead Publishing; 2021 Dec 1.

Jagadeesh, Praveenkumara, Madhu Puttegowda, Yashas Gowda Thyavihalli Girijappa, Sanjay MavinkereRangappa, Munish Kumar Gupta, and Suchart Siengchin. "Mechanical, electrical and thermal behaviourof additively manufactured thermoplastic composites for high performance applications." In Additiveand Subtractive Manufacturing of Composites, pp. 167-199. Springer, Singapore, 2021.

T.G Yashas Gowda, Sanjay M R, Jyotishkumar Parameswaranpillai, Suchart Siengchin, Klaus Friedrich, “Tribological Applications of Polymer Composites” In Book. Tribologyof Polymer Composites: Characterisation, Properties, and Applications, Elsevier Inc

Puttegowda M, Thyavihalli Girijappa YG, Mavinkere Rangappa S, Parameswaranpillai J, Siengchin S. Effect of process engineering on the performance of hybrid fiber composites. Hybrid fiber composites: materials, manufacturing, process engineering. 2020 Oct 12:17-40.

Ashrith, H. S., Jeevan, T. P., & Doddamani, M. Experimental investigation on the machinability characteristics in drilling of syntactic foams. International Conference on Trends in Mechanical Engineering Sciences (ICTMES-2020), April 10-12, Hassan, India, 2020.

Madhu, K. S., Sharath, B. N.  C. V. Venkatesh, and D. G. Pradeep. "Evaluation of Mechanical Properties of Ceramic Reinforced Aluminium-7029 Hybrid Composite." In IOP Conference Series: Materials Science and Engineering, vol. 1189, no. 1, p. 012019. IOP Publishing, 2021. doi:10.1088/1757-899X/1189/1/012019. [Scopus Index]

1. Sharath, B. N., K. S. Madhu, D. G. Pradeep, and C. V. Venkatesh. "Tribological Suitability of aluminium hybrid composite above atmospheric temperature." In IOP Conference Series: Materials Science and Engineering, vol. 1189, no. 1, p. 012018. IOP Publishing, 2021. doi:10.1088/1757-899X/1189/1/012018. [Scopus Index]

1. Pradeep DG, Sharath BN, Madhu KS, Karthik S, Venkatesh CV. Investigating the adhesion strength of electrodeposited Ni-Al2O3 nano composite on Al-2618 substrate by using the scratch test technique. Materials Today: Proceedings. 2021 Dec 1.    https://doi.org/10.1016/j.matpr.2021.11.336. [Scopus Index]

1. Pradeep DG, Sharath BN, et.al. “Study on scratch behavior of Ni-Al2O3 coating composition on Al-2219 substrate by electro deposited technique”. Materials Today: Proceedings. 2021 May 4. https://doi.org/10.1016/j.matpr.2021.04.033. [Scopus Index]

1. Pradeep, D. G., H. S. Nithin, B. N. Sharath, K. S. Madhu, and C. V. Venkatesh. "Microstructure and Wear Behavior of Microwave Treated WC-10Co-4Cr Composite Coating on AISI 4140 Alloy Steel." Materials Science and Engineering, vol. 1189, no. 1, p. 012012. IOP Publishing, 2021. doi:10.1088/1757-899X/1189/1/012012. [Scopus Index] 

Divya H. V., Kavya H. M., , Effect of wood filler and short Glass fiber on mechanical properties of Polypropylene Hybrid Composites, International Conference on Frontiers in Engineering Scienece and Technology, ICFEST - 2020, 18th& 19th December 2020.

Kavya H M, Divya H V, Rudresh B M, D. Saravana Bavan, B. Yogesha., Investigation of Tribological Properties of Wood Filler Filled Polymer Hybrid Composites, International Conference on Trends in Mechanical Engineering Sciences (ICTMES -2020), 6-7th August, 2020, MCE, Hasaan

Vinod, A., TG Yashas Gowda, R. Vijay, M. R. Sanjay,Munish Kumar Gupta, Muhammad Jamil, Vinod Kushvaha,and Suchart Siengchin. "Novel MuntingiaCalabura bark fiber reinforced green-epoxy composite: A sustainable and green material for cleaner production." Journal of Cleaner Production 294 (2021): 126337. 

Madhu P, Mavinkere Rangappa S, Khan A, Al Otaibi A, Al‐Zahrani SA, Pradeep S, Gupta MK, Boonyasopon P, Siengchin S. Experimental investigation on the mechanical and morphological behavior of Prosopis juliflora bark fibers/E‐glass/carbon fabrics reinforced hybrid polymeric composites for structural applications. Polymer Composites. 2020 Dec;41(12):4983-93.

Synthesis and Characterization of Al 7072-Al2O3 Metal Matrix Composites, Springer  Lecture Notes in Mechanical Engineering, Aug-2020,  167-181.

Development on graphene based polymer composite materials and their applications—A recent review, AIP Conference Proceedings, Feb - 2021, 263-271.

"Mechanical and wear behaviour of flyash reinforced epoxy composites." Journal of Mines, Metals and Fuels (2021): 78-83.

Vinod, A., Yashas Gowda, Senthilkumar Krishnasamy, M. R. Sanjay, and Suchart Siengchin. "Thermal Properties of Hybrid Natural Fiber‐Reinforced Thermoplastic Composites." Natural Fiber‐Reinforced Composites: ThermalProperties and Applications (2022): 17-30.

Madhu, P., Mavinkere Rangappa, S., Khan, A., Al Otaibi, A., Al‐Zahrani, S.A., Pradeep, S., Gupta, M.K., Boonyasopon, P. and Siengchin, S., 2020. Experimental investigation on the mechanical and morphological behavior of Prosopis juliflora bark fibers/E‐glass/carbon fabrics reinforced hybrid polymeric composites for structural applications. Polymer Composites, 41(12), pp.4983-4993.

Madhu, P., Bharath, K.N., Sanjay, M.R., Arpitha, G.R. and Saravanabavan, D., 2021. Effect of nano fillers on glass/silk fibers based reinforced polymer composites. Materials Today: Proceedings, 46, pp.9032-9035.

Bharath, K.N., Madhu, P., Gowda, T.Y., Sanjay, M.R., Verma, A. and Siengchin, S., 2021. Mechanical and chemical properties evaluation of sheep wool fiber–reinforced vinylester and polyester composites. Materials Performance and Characterization, 10(1), pp.99-109.

TG, Y.G., P, M., Kushvaha, V., MR, S. and Siengchin, S., 2021. A new study on flax‐basalt‐carbon fiber reinforced epoxy/bioepoxy hybrid composites. Polymer Composites, 42(4), pp.1891-1900.

Nagarajan, K.J., Ramanujam, N.R., Sanjay, M.R., Siengchin, S., Surya Rajan, B., Sathick Basha, K., Madhu, P. and Raghav, G.R., 2021. A comprehensive review on cellulose nanocrystals and cellulose nanofibers: Pretreatment, preparation, and characterization. Polymer Composites, 42(4), pp.1588-1630.

Bharath, K.N., Madhu, P., Gowda, T.G., Verma, A., Sanjay, M.R. and Siengchin, S., 2020. A novel approach for development of printed circuit board from biofiber based composites. Polymer Composites, 41(11), pp.4550-4558.

Bharath, K.N., Madhu, P., Gowda, T.Y., Sanjay, M.R., Kushvaha, V. and Siengchin, S., 2020. Alkaline effect on characterization of discarded waste of Moringa oleifera fiber as a potential eco-friendly reinforcement for biocomposites. Journal of Polymers and the Environment, 28, pp.2823-2836.

Puttegowda, M., M. Rangappa, S., Khan, A., Al‐Zahrani, S.A., Al Otaibi, A., Shivanna, P., Moure, M.M. and Siengchin, S., 2020. Preparation and characterization of new hybrid polymer composites from Phoenix pusilla fibers/E‐glass/carbon fabrics on potential engineering applications: Effect of stacking sequence. Polymer Composites, 41(11), pp.4572-4582.

Effect of Silicon Carbide on the Mechanical Properties of the Rice Husk, Corn Cob Polymer Matrix Composites

Shivashankara BS, Gopi KR, Pradeep S, Rao RR, Venkatesha BK. Effect of processing route on grain refinement and mechanical properties in equal channel angular pressing of aluminium alloy AA7068. Journal of Mines, Metals and Fuels. 2021:1-7.

Yashas Gowda Thyavihalli Girijappa, Sanjay Mavinkere Rangappa, Suchart Siengchin Mechanical and thermal properties of flax /carbon/kevlar based epoxy hybrid composites. International conference on sugar palm and allied fibre polymer composites 2021 11 DECEMBER 2021(Oral presentation)

  T.R. Praveen, H. Shivananda Nayaka, Swaroop, S, K.R. Gopi “Strength enhancement of magnesium alloy through equal channel angular pressing and laser shock peening”, Applied Surface Science, 2020, 512, 145755.  (IF-6.707)

K.R. Gopi, H. Shivananda Nayaka “Impact of ECAP on wear performance of Al–Mn magnesium alloy”, Materials Research Express, 2020, 7(1), 016550. (IF-1.620).

Yashas Gowda Thyavihalli Girijappa, Sanjay Mavinkere Rangappa, Suchart Siengchin “Mechanical Property Evaluation of Hybrid Areca/Basalt/Carbon fibers Reinforced Epoxy/Bio-Epoxy Composites” Research, Invention, and Innovation Congress Bangkok, Thailand, 1 – 2 September 2021. (Oral presentation)

Impact of heat treatment on the mechanical performance of hot extruded Al6061-BN reinforced metal matrix composites

Experimental Study on Dry Sliding Wear Behaviour of Al-B4C-Gr Metal Matrix Composite at Different Temperatures

Mechanical Properties Evaluation of Friction Stir Welded AA6061-AA7075 Alloys for Different Tool Pin Geometries

Yogish CK, Pradeep S, Kuldeep B, Ravikumar KP, Raghavendra RR. Processing and evaluation of mechanical properties of coconut coir and rice husk reinforced natural hybrid composites. Applied Mechanics and Materials. 2019 Dec 2;895:176-80.

P Madhu, T G Yashas Gowda, Sanjay M R, Jyotishkumar Parameswaranpillai, Suchart Siengchin, “Effect of process engineering on the performance of hybrid fiber composites” In book. Hybrid Fiber Composites. Materials, Manufacturing, ProcessEngineering. Wiley.

Yashas Gowda T G, Vinod A, Madhu.P.Sanjay M R, Jyotishkumar Parameswaranpillai, Suchart Siengchin “Plastics in automotive applications”, Encyclopedia of Materials: Plasticsand Polymers.Elsvier.

Processing and evaluation of mechanical properties of coconut coir and rice husk reinforced natural hybrid composites

K N Bharath, Madhu P, Yashas Gowda T G, Akarsh Verma, Sanjay M R, Suchart Siengchin. 2021. Mechanicaland chemical properties evaluation of sheep wool fiber–reinforced vinylester and polyestercomposites. Materials Performance and Characterization, 10(1), pp.99-109. 

K N Bharath, Madhu P, Yashas Gowda T G, Akarsh Verma, Sanjay M R, Suchart Siengchin. "A novel approach for development of printed circuitboard from biofiberbased composites." Polymer Composites 41, no. 11 (2020):4550-4558. 

K N Bharath, Madhu P, Yashas Gowda T G, Sanjay M R, Suchart Siengchin, Vinod Kushvaha."Alkaline effect on characterization of discarded waste of Moringaoleifera fiber as a potential eco-friendly reinforcement for biocomposites." Journal of Polymers and the Environment 28, no. 11 (2020): 2823-2836. 

T G Yashas Gowda, Sanjay M R, Jyotishkumar Parameswaranpillai, Suchart Siengchin, “Natural Fibers as Sustainable and Renewable Resource for Development of Eco- friendly Composites: A Comprehensive Review” Frontiers in Materials, Polymeric and Composite Materials, 2019. 

Studies on Mechanical Properties of Ultra High Molecular Weight Poly Ethylene (UHMWPE)-Basalt Fiber Reinforced Hybrid Polymer Matrix Composites

‘Development on graphene based polymer composite materials & their applications – a recent review ’, International Conference on Advanced Trends in Mechanical and Aerospace Engineering, 7th to 9th Nov. 2019, Dayanandasagar University , Bengaluru

Madhu P, Pradeep S, Sanjay MR, Siengchin S. Characterization of raw and alkali treated prosopis juliflora fibers for potential polymer composite reinforcement. InIOP Conference Series: Materials Science and Engineering 2019 Nov 1 (Vol. 653, No. 1, p. 012016). IOP Publishing.

Raghavendra RR, Bharath N, Pradeep S, Yogisha CK. Mechanical Properties Evaluation of Friction Stir Welded AA6061-AA7075 Alloys for Different Tool Pin Geometries. Applied Mechanics and Materials. 2019 Dec 2;895:295-300.

Madhu P, Sanjay MR, Senthamaraikannan P, Pradeep S, Saravanakumar SS, Yogesha B. A review on synthesis and characterization of commercially available natural fibers: Part II. Journal of Natural Fibers. 2019 Jan 2;16(1):25-36.

Madhu, P., Pradeep, S., Sanjay, M.R. and Siengchin, S., 2019, November. Characterization of raw and alkali treated prosopis juliflora fibers for potential polymer composite reinforcement. In IOP Conference Series: Materials Science and Engineering (Vol. 653, No. 1, p. 012016). IOP Publishing.

" ELECTRONIC VOTING SYSTEM USING AUTOMATED BIOMETRIC VOTER AUTHENTICATION SYSTEM

DV Nitin, PG Student, BS Shivashankara

International Journal of Engineering Applied Sciences and Technology 4 …

Divya H V1, Rudresh B M, Kavya H M, Yogesha B, SaravanaBavan, “Effect of Wood Filler on Tensile and Flexural Properties of Short Glass Fiber Reinforced Polypropylene Hybrid Composites”, National Conference, ATME College of Engineering, Mysore, 26-28, March 2019

PLC BASED AUTOMATIC FUEL DISPENSING SYSTEM USING RFID TECHNOLOGY

MB Shreedhar, BS Shivashankara

International Journal of Engineering Applied Sciences and Technology 4 (1 …

Presented technical paper in National Conference on "Advances in Mechanical Engineering (AIME-2019)" organized by the Department of Mechanical Engineering, Rajeev Institute of Technology, Hassan held during May, 2019.

Angadi, S. B., Ashrith, H. S., Gaitonde, V. N., Karnik, S. R., & Doddamani, M. (2019). Experimental investigations on hole quality in drilling of cenosphere reinforced epoxy composite. In IOP Conference Series: Materials Science and Engineering, 561(1), 012039.

S B Angadi, Ashrith H S, Mrityunjay Doddamani, V N Gaitonde and S R Karnik. Experimental investigations on hole quality in drilling of cenosphere reinforced epoxy composite. First International Conference on Materials Science and Manufacturing Technology (ICMSMT-2019), April 12-13, Coimbatore, Tamil Nadu, India, 2019.

Fracture Toughness of Sisal/Banana Hybrid Composite, International Journal of Mechanical Engineering Research and Development, Vol –9, Issue- 6, Dec – 2019, 161 - 170.

Vibration Based Piezoelectric Energy Harvesting - A Review IOP Conf. Series: Materials Science and Engineering 995 (2020) 012007
IOP Publishing doi:10.1088/1757-899X/995/1/012007

Senthilkumar, M, Vasundhara, MG & F, Rohit Adaikala Raj, (2019) ‘A Study on Tunable Vibration Based Energy Harvester Using Shape Memory Effect. National Journal of Technology, vol 14, no. 6, pp. 29-32 (ISSN - 0973 – 1334)

R. Sampath, H.S. Nayaka, Sandeep sahu, K.R. Gopi, M.J. Shivaram, and Shashibhushan Arya “Influence of Multiaxial Cryoforging on Microstructural, Mechanical, and Corrosion Properties of Copper-Titanium Alloy” Journal of Materials Engineering and Performance, 2019, 28(12), 7629-41 (IF-1.819). 

Senthilkumar, M, Vasundhara, MG & F, Rohit Adaikala Raj, (2019) ‘A Study on Tunable Vibration Based Energy Harvester Using Shape Memory Effect. National Journal of Technology, vol 14, no. 6, pp. 29-32 (ISSN - 0973 – 1334)

GK, Kalavathi, FA Najar, and Vasundhara MG. 2019. “Performance Characteristics of Journal Bearings (Porous Type): A Coupled Solution Using Hartmann Number and Roughness Parameter.” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, November, 135065011988670. https://doi.org/10.1177/1350650119886709.

Divya H. V., Rudresh B M, Jeevan T P, Yogesha B, Effect of wood filler on mechanical properties of short carbon fiber reinforced Polypropylene Hybrid Composites, International Conference on Recent Trends in Science & Technology, ICRTST - 2020, 17th & 18th June 2020.

Energy Management in Welding Intensive Industrial Cluster: Energy Saving opportunity, Journal of Emerging Technologies and Innovative Research, Vol –8, Issue- 5, Jan – 2020, 827 - 832.

Vasundhara, MG, Senthilkumar, M & Kalavathi, GK 2019, ‘A Distributed Parametric Model of Shape Memory Alloy based Resonant Frequency Tunable Cantilevered PZT Energy Harvester with tip mass’, International ISSS Journal of Micro and Smart Systems, vol. 8, no. 1, pp. 13–24. (ISSN: 2509-7989)

Divya H. V., Rudresh B M, Jeevan T P, Yogesha B, Effect of wood filler on mechanical properties of short carbon fiber reinforced Polypropylene Hybrid Composites, International Research Journal of Engineering and Technology, Vol.7: 389-393, 2020.

Madhu, P., Sanjay, M.R., Jawaid, M., Siengchin, S., Khan, A. and Pruncu, C.I., 2020. A new study on effect of various chemical treatments on Agave Americana fiber for composite reinforcement: Physico-chemical, thermal, mechanical and morphological properties. Polymer Testing, 85, p.106437.

Madhu, P., Sanjay, M.R., Senthamaraikannan, P., Pradeep, S., Siengchin, S., Jawaid, M. and Kathiresan, M., 2020. Effect of various chemical treatments of Prosopis juliflora fibers as composite reinforcement: Physicochemical, thermal, mechanical, and morphological properties. Journal of Natural Fibers, 17(6), pp.833-844.

Manually Operated Coconut Dehusking Machine for Rural Agriculturist, Recent Trends in Automation and Automobile Engineering, Vol –3, Issue- 1, Apr – 2020, 1 - 6.

R. Sampath, H.S. Nayaka, K.R. Gopi “Influence of Multi Axial Forging (MAF) on Microstructure and Mechanical Properties of Cu-Ti Alloy”, Materials Today: Proceedings, 2018, 5(11), 25534-25540. (Scopus).  

B. Kuldeep, K.P. Ravikumar, S. Pradeep and K.R. Gopi “Effect of boron nitride and zirconium dioxide on mechanical behavior of Al7075 metal matrix hybrid composite”, Materials Research Express, 2018, 6(3), 036509. (IF-1.620).

R. Sampath, H.S. Nayaka, K.R. Gopi, S. Sahu, Udaya Bhat “Investigation of microstructure and mechanical properties of the Cu-3% Ti alloy processed by multiaxial cryo-forging”, Journal of Materials Research, 2018, 33(22), 3700-3710. (IF-2.502)

Cordin M, Bechtold T, Pham T. Effect of fibre orientation on the mechanical properties of polypropylene–lyocell composites. Cellulose. 2018 Dec;25:7197-210.

R. Sampath, H.S. Nayaka, K.R. Gopi, S. Sahu “Effect of multiaxial cryoforging on microstructure and mechanical properties of a Cu-Ti Alloy”, Materials Research Express, 2018, 6(2), 026556. (IF-1.620).

Madhu P, Sanjay MR, Senthamaraikannan P, Pradeep S, Saravanakumar SS, Yogesha B. A review on synthesis and characterization of commercially available natural fibers: Part-I. Journal of Natural Fibers. 2018 Apr 5.

Fabrication of working model of plc based agv for serving in hotel

SHKVKGT Spoorthiraj K N , Shivashankara B S , Sree Rajendra

IJRET: International Journal of Research in Engineering and Technology 7 (7 …

Design and Fabrication of PLC and SCADA Based Robotic Arm for Material Handling

CD Veena, HK Sharath, S Rajendra, BS Shivashankara

International Research Journal of Engineering and Technology (IRJET)

Sanjay MR, Madhu P, Jawaid M, Senthamaraikannan P, Senthil S, Pradeep S. Characterization and properties of natural fiber polymer composites: A comprehensive review. Journal of Cleaner Production. 2018 Jan 20;172:566-81.

R. Sampath, H.S. Nayaka, G. Anne and K.R. Gopi “Influence of cold rolling process on microstructure and mechanical properties of Cu-1.5%Ti alloy” in “AIP Conference Proceedings” 2018, 1943(1), 020055. (Scopus).  

S. Vasanth, H. Krishna, K.R. Gopi and G. Anne “Influence of heat treatment on Cr and Fe-rich precipitates in thermally aged duplex steels” Emerging Materials Research, 2018, 7(3), 153-159. (IF-0.640).  

Puttegowda M, Rangappa SM, Jawaid M, Shivanna P, Basavegowda Y, Saba N. Potential of natural/synthetic hybrid composites for aerospace applications. InSustainable composites for aerospace applications 2018 Jan 1 (pp. 315-351). Woodhead Publishing.

Energy management in agricultural implements and tractor trailer industry, Journal of Emerging Technologies and Innovative Research, Vol –6, Issue- 4, April – 2018, 537 - 542

Mechanical Properties of Sisal/Banana Hybrid Composite Reinforced Polyester Composites, Journal of Emerging Technologies and Innovative Research, Vol –6, Issue- 6, May – 2019, 508 - 512.

• Hanumantharaya R, Vaishak N L, Suhas, Mahesh B Davanageri, Jaimon D Quadros, Premkumar B G, ‘Mechanical and Tribological Wear Behavior of Epoxy Hybrid Composites’, materials today proceedings,elsevier publications (scopus indexed), Volume 5, Issue 2, Part 2, 2018, Pages 7947-7953Hanumantharaya R, Vaishak N L, Suhas, Mahesh B Davanageri, Jaimon D Quadros, Premkumar B G, ‘Mechanical and Tribological Wear Behavior of Epoxy Hybrid Composites’, materials today proceedings,elsevier publications (scopus indexed), Volume 5, Issue 2, Part 2, 2018, Pages 7947-7953

Kuldeep B, Ravikumar KP, Pradeep S. Effect of hexagonal boron nitrate on microstructure and mechanical behavior of Al7075 metal matrix composite producing by stir casting technique. International Journal of Engineering. 2019 Jul 1;32(7):1017-22.

Praveenkumara J, Madhu P, Yashas Gowda TG, Pradeep S. Studies on mechanical properties of bamboo/carbon fiber reinforced epoxy hybrid composites filled with SiC particulates. Int. J. Eng. Res. Gen. Sci. 2018;6(5):1-9.

Kuldeep B, Ravikumar KP, Pradeep S, Gopi KR. Effect of boron nitride and zirconium dioxide on mechanical behavior of Al7075 metal matrix hybrid composite. Materials Research Express. 2018 Dec 5;6(3):036509.

T.R. Praveen, K.R. Gopi and H. Shivananda Nayaka “Numerical Simulation of Shot Peening Process on Equal Channel Angular Pressed Magnesium Alloy”, Silicon, 2018, 10(6), 2463-2472.  (IF-2.67)

H. V. Divya , H. M. Kavya , D. SaravanaBavan , B. Yogesha (2018), " Evaluation of Mechanical Properties of Wood Particles Reinforced Polymer Composites", Manufacturing Science and Technology, 5 , 17 - 21. doi: 10.13189/mst.2018.050201.

Madhu P, Sanjay MR, Senthamaraikannan P, Pradeep S, Siengchin S, Jawaid M, Kathiresan M. Effect of various chemical treatments of Prosopis juliflora fibers as composite reinforcement: Physicochemical, thermal, mechanical, and morphological properties. Journal of Natural Fibers. 2018 Oct 22.

Madhu P, Sanjay MR, Pradeep S, Bhat KS, Yogesha B, Siengchin S. Characterization of cellulosic fibre from Phoenix pusilla leaves as potential reinforcement for polymeric composites. Journal of Materials Research and Technology. 2019 May 1;8(3):2597-604.

Madhu, P., Sanjay, M.R., Pradeep, S., Bhat, K.S., Yogesha, B. and Siengchin, S., 2019. Characterization of cellulosic fibre from Phoenix pusilla leaves as potential reinforcement for polymeric composites. Journal of Materials Research and Technology, 8(3), pp.2597-2604.

 Vasundhara, MG, Senthilkumar, M & Kalavathi, GK 2018, ‘A distributed parametric model of Brinson shape memory alloy based resonant frequency tunable cantilevered PZT energy harvester’, International Journal of Mechanics and Materials in Design, vol. 15, no. 3, pp. 555–568. Updated List of Journals (ISSN: 1573-8841) Impact factor – 3.143.

Senthilkumar, M, Vasundhara, MG & Kalavathi, GK 2018, ‘Electromechanical analytical model of shape memory alloy based tunable cantilevered piezoelectric energy harvester’, International Journal of Mechanics and Materials in Design,      vol. 15, no. 3, pp. 611–627. Updated List of Journals (ISSN: 1573-8841), Impact factor – 3.143.

K.R. Gopi, H. Shivananda Nayaka and Sandeep Sahu “Corrosion Behavior of ECAP-Processed AM90 Magnesium Alloy”, Arabian Journal for science and Engineering, 2018, 43 (9), 4871-4878. (IF-2.334)

• Hemanth T S, Y. Arunkumar, M.S.Srinath, " Optimize the Rolling Process Parameters for Material AA1100 using Metal Forming Simulation ",  MATEC Web of Conferences 144, 03005 (2018)

Ashrith H S, Mrityunjay Doddamani & V N Gaitonde. Experimental investigation on the machinability characteristics in drilling of epoxy syntactic foam. 7th International Engineering Symposium - IES 2018, March 7-9, Kumamoto University, Japan, 2018.

Ashrith H S, Mrityunjay Doddamani & V N Gaitonde. Evaluation of circularity error in drilling of syntactic foam composites. International Conference on Design, Materials & Manufacture, January 29-31, NITK Surathkal, 2018.

J Praveenkumara, P Madhu, T.G Yashas Gowda, S Pradeep, “Studies on Mechanical Properties of Bamboo/Carbon Fiber Reinforced Epoxy Hybrid Composites Filled with SiC Particulates” International Journal of Engineering Research and General Science Volume 6,Issue 5, September-October, 2018

T G Yashas Gowda, Sanjay M R, Subrahmanya Bhat, P Madhu, P Senthamaraikannan, B Yogesha, “Polymer matrix-natural fiber composites: An overview” TAYLOR & FRANCIS GROUP, Cogent Engineering, 2018. 

Fracture characterization of banana fiber reinforced polymer composite, IOP publishing- Materials Science and Engineering, Vol – 376, Issue- 1, March – 2018, 01 - 07

Ashrith H S, Mrityunjay Doddamani & V N Gaitonde (2019). Effect of wall thickness and cutting parameters on drilling of glass microballoon/epoxy syntactic foam composites. Composite Structures; 

Ashrith H, S., Doddamani, M., & Gaitonde, V. (2018). Evaluation of circularity error in drilling of syntactic foam composites. In American Institute of Physics Conference Series, 1943(2), 20065.

Ashrith, H. S., Doddamani, M., Gaitonde, V., & Gupta, N. (2018). Influence of materials and machining parameters on drilling performance of syntactic foams. Materials Performance and Characterization, 7(1), 495-514.

Ashrith, H. S., Doddamani, M., Gaitonde, V., & Gupta, N. (2018). Hole Quality Assessment in Drilling of Glass Microballoon/Epoxy Syntactic Foams. JOM, 70(7), 1289-1294.

Madhu, P., Sanjay, M.R., Senthamaraikannan, P., Pradeep, S., Saravanakumar, S.S. and Yogesha, B., 2019. A review on synthesis and characterization of commercially available natural fibers: Part II. Journal of Natural Fibers, 16(1), pp.25-36.

Athith, D., Sanjay, M.R., Yashas Gowda, T.G., Madhu, P., Arpitha, G.R., Yogesha, B. and Omri, M.A., 2018. Effect of tungsten carbide on mechanical and tribological properties of jute/sisal/E-glass fabrics reinforced natural rubber/epoxy composites. Journal of Industrial Textiles, 48(4), pp.713-737.

• Hemanth S Thulasi, Y. Arunkumar, M.S.Srinath, Effect of different roller shape on the spread of material in rolling operation using manufacturing simulation, Proceedings of International Conference on Green Trends in Mechanical Engineering Sciences, MCE, Hassan, 3-5 October, 2018.

FRICTION STIR WELDING OF DISSIMILAR ALUMINUM ALLOYS AA6061 - AA7075

DN Ravikiran, DS Pradeep, BS Shivashankar

International Journal of Engineering Research and Modern Education 2 (2), 48-52

D. N. Ravikiran, Dr. S. Pradeep & B. S. Shivashankar, “Friction Stir Welding of Dissimilar Aluminum Alloys AA6061 - AA7075”, International Journal of Engineering Research and Modern Education, Volume 2, Issue 2, Page Number 33-41, 2017.

• Hemanth T S, Y. Arunkumar, M.S.Srinath, " Optimize the Rolling Process Parameters for Material AA1100 using Metal Forming Simulation ",  RiMES, Manipal, 22-24 December, 2017.

K.R. Gopi and H. Shivananda Nayaka “Microstructure and mechanical properties of magnesium alloy processed by equal channel angular pressing (ECAP)”, Materials Today: Proceedings, 2017, 4(9), 10288-10292. (Scopus).  

K. J. Dileep, Mushabhir Hussain “Pedal Operated Multipurpose Bicycle with Sprayer and Water lifting Pump” IJLERA 2017.

• Hemanth T S, Y. Arunkumar, M.S.Srinath, " Assessing The Influence Of Rolling Parameters On The Spread of Hot Rolled Aluminum Alloy Slab Using Manufacturing Simulation" , International Journal Of Engineering Sciences & Management, March 2017, PP: 166 - 175.

Madhu, P., Sanjay, M.R., Senthamaraikannan, P., Pradeep, S., Saravanakumar, S.S. and Yogesha, B., 2018. A review on synthesis and characterization of commercially available natural fibers: Part-I. Journal of Natural Fibers.

Sanjay, M.R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S. and Pradeep, S., 2018. Characterization and properties of natural fiber polymer composites: A comprehensive review. Journal of Cleaner Production, 172, pp.566-581.

D Athith, Sanjay M R, T G Yashas Gowda, P Madhu, G R Arpitha, B Yogesha, Med Amin Omri, "Effect of Tungsten Carbide on Mechanical and Tribological Properties of Jute/Sisal/E-Glass Fabrics Reinforced NaturalRubber/Epoxy Composites" SAGE, Journal of Industrial Textiles, 2017. DOI: 10.1177/1528083717740765 (IF: 1.884, SCI Indexed)

Ashrith H S, Mrityunjay Doddamani, V N Gaitonde & Nikhil Gupta. Machinability Study of Syntactic Foams. Proceedings of the 10th International Conference on Precision, Meso, Micro and Nano Engineering, 456-459, December 07-09, IIT Madras, 2017. 

G.Anil Kumar, J.Satheesh, Yashas Gowda T.G,T.Madhusudhan "Hybrid Aluminium MetalMatrix Composites and Reinforcement    Materials:A Review" International Journal of Innovative Research in Science, Engineering and Technology,2016, ISSN : 23470-6710

Ashrith H S, Mrityunjay Doddamani, V N Gaitonde & Nikhil Gupta. Surface roughness evaluation in drilling of syntactic foams. International Conference on Advances in Polymer Science and Technology, November 23-25, IIT Delhi, New Delhi, 2017.

  K.R. Gopi, H. Shivananda Nayaka and Sandeep Sahu “Microstructural Evolution and Strengthening of AM90 Magnesium Alloy processed by ECAP”, Arabian Journal for science and Engineering” 2017, 42(11), 4635-4647. (IF-2.334)

  K.R. Gopi and H. Shivananda Nayaka “Tribological and corrosion properties of AM70 magnesium alloy processed by equal channel angular pressing”, Journal of Materials Research, 2017, 32(11), 2153-2160. (IF-2.502)

Tensile property evaluation of sisal – glass fiber reinforced polymer based composites, International journal of composite materials, Vol – 7, Issue- 3, Oct.-2017, 77 – 81

K.R. Gopi, H. Shivananda Nayaka and Sandeep Sahu “Wear properties of ECAP-Processed AM80 Magnesium Alloy”, Journal of Materials Engineering and Performance, 2017, 26(7), 3399-3409. (IF-1.819)

Praveenkumara, J., Madhu, P., Yashas Gowda, T.G. and Pradeep, S., 2018. Studies on mechanical properties of bamboo/carbon fiber reinforced epoxy hybrid composites filled with SiC particulates. Int. J. Eng. Res. Gen. Sci, 6(5), pp.1-9.

Praveenkumara, J., Sunder, R.N., Chandan, H.R., Srivathsa, M. and Madhu, P., 2017, December. Natural fibers and its composites for engineering applications: An overview. In SARC International Conference, Chennai India.

Yashas Gowda, T.G., Sanjay, M.R., Subrahmanya Bhat, K., Madhu, P., Senthamaraikannan, P. and Yogesha, B., 2018. Polymer matrix-natural fiber composites: An overview. Cogent Engineering, 5(1), p.1446667.

Physical and Water Absorption Behaviour of Sisal – Glass Fiber Reinforced Polymer based Composites, American Journal of Materials Science, Vol – 6, Issue- 4, Nov-2016, pp 91-94.

H.V.Divya , L. LaxmanaNaik , B.Yogesha, "Processing Techniques of Polymer Matrix Composites – A Review", International Journal of Engineering Research and General Science Volume 4, Issue 3, May-June, 2016 ISSN 2091-2730.

K.R. Gopi, H. Shivananda Nayaka and Sandeep Sahu “Investigation of Microstructure and Mechanical Properties of ECAP-Processed AM Series Magnesium Alloy”, Journal of Materials Engineering and Performance, 2016, 25(9), 3737-3745. (IF-1.819)

Presented technical paper in "International Conference on recent trends in Engineering and Material Sciences (ICEMS-2016)" organized by Jaipur National University, Jaipur held during March, 2016.

Madhu, P., 2016. Stress analysis and life estimation of gas turbine blisk for different materials of a jet engine. International Journal of Science and Research, 5(6), pp.1103-1107.

Exhaust Gas Heat Recovery for IC Engine Using Refrigeration Systems

  M R Sanjay, B Yogesha, “Studies on Mechanical Properties of Jute/E-Glass Fiber Reinforced Epoxy Hybrid Composites” Journal of Minerals and Materials Characterization and Engineering (JMMCE), 2016, 4, 15-25.

M R Sanjay, G R Arpitha, L Laxmana Naik, K Gopalakrisha, B Yogesha, "Applications of Natural Fibers and Its Composites: An Overview” Natural Resources, 2016, 7, 108-114.

  M R Sanjay, B Yogesha, “Study on Water Absorption Behaviour of Jute and Kenaf Fabric Reinforced Epoxy Composites: Hybridization Effect of E-Glass Fabric” International Journal of Composite Materials, 2016, 6 (2), pp.55-62.

A. N. Basavaraju, Mallikappa, B. Yogesha, "Performance of SI Engine by Using Pre-heated Fuel with Carburetor" International Journal of Energy Engineering 2016, 6(1): 16-24.

Divya H. V, Laxmana Naik L, Yogesha B "Processing Techniques of polymer matrix composites-A review"  International Journal of Engineering Research and General Sciences (IJERGS), in Volume 4, Issues 3, May - June 2016, ISSN-2091-2370.

Ranjith T.R, Yogesha B. "Re-configurable Hybrid Smart Micro-Grid Based on CAN and RS Protocol with Solar Energy" International Journal of Modern Trends in Engineering and Science,  Volume 3, Issues 10, 2016, ISSN-2348-3121.

Experimental Investigation on Mechanical Properties of Hemp/E-Glass Fabric Reinforced Polyester Hybrid Composites, Journal of Materials and Engineering Structures, Vol – 6, Issue- 4, Aug-2016, 117-128

    Studies on Mechanical Properties of Banana/E-Glass Fabrics Reinforced Polyester Hybrid Composites, Journal of Materials and Environmental Science, Vol - 7, Issue- 9, June – 2016, 3179-3192

G.Anil Kumar, J.Satheesh , Yashas Gowda T.G, T.Madhusudhan “Tribological and mechanical properties of Al6082 reinforced with B4C particles produced by powder metallurgy technique” IRJET,Volume 03,Issue7,July 2016, ISSN: 2395 -0056

• Rakshith T.,  M. S. Srinath,  Y. Arunkumar, Hemanth S Thulasi, Optimization of Parameters for Elbow Component using Manufacturing Simulation, Advanced Materials Manufacturing & Characterization, 2016, 6 [1], 79-85.

Processing Techniques of Polymer Matrix Composites – A Review, IJERGS, Vol-4, Issue- 3, June, 2016, 357 to 362

    Arduino controller based smart stick for visually challenged using Zigbee Communication, IJERGS, Vol - 3, Issue- 6, Dec – 2015, 578 to 582

Sanjay M R, Arpitha G R, L Laxmana Naik, B Yogesha, “Design and Fabrication of Ginger Harvesting Machine” World Journal of Engineering and Technology, 2015, 3, 320-338.

PLC Based Automatic Fault Detection of Railway Track and Accidence Avoidance System

PK Kumar, BS ShivaShankara

International Journal of Engineering Research and General Science 3 (2)

A.N.Basavaraju, Mallikappa, B.Yogesha. "Performance of SI Engine to Improve the Combustion Characteristics by Using Methanol Blended Petrol" Applied Mechanics and Materials, Volume, 813, pp.857-861, 2015.

L Laxman Naik, K Gopalkrishna, B Yogesha. “Review on Mechanical Properties of Sisal and Banana Reinforced Composites” International Journal of Engineering Research and General Sciences (IJERGS), in Volume 3, Issues 5, September - October 2015, ISSN-2091-2370.

Harshitha Keshav, B Yogesha, “Automatic Monitoring and Controlling of Distribution Transformer using Power Line Communication” July 2015, IJIRT, Volume 2 Issue 2 | ISSN: 2349-6002.

M R Sanjay, G R Arpitha, B Yogesha, “Study on Mechanical Properties of Natural - Glass Fibre Reinforced Polymer Hybrid Composites: A Review” Elsevier, Materials Today: P, Volume 2, Issue 4-5, 2015, pp.2959-2967.

  A.N.Basavaraju, Mallikappa, B.Yogesha “Investigation on Performance of SI Engine to Improve the Combustion Characteristics by Using Pre-heated fuel” International Journal of Science and Research (IJSR), Volume 4 Issue 2, February 2015, ISSN (Online): 2319-7064.

• Hemanth T S, Arunkumar Y, Srinath M.S, Rakshith T, “Manufacturing Simulation for determining the   Influence of Process Parameters on quality of forgings”,. International Journal of Engineering Research & Technology (IJERT), NCERAME-March 2015,PP. 146-151.

  Design and fabrication of ginger harvesting machine, WJET, Vol. – 3, Nov – 2015, 320 to 338

Review on Mechanical Properties of Sisal and Banana Reinforced Composites, IJERGS,Vol - 3, Issue 5, Oct – 2015, 247 to 251

  Participated and Presented Paper in the International Conference on Recent Trends in Engineering and Management-2015, Jawaharlal Nehru University (JNU, Convention Center), New Delhi.

Applications of natural fibers and its composites: an overview, Natural resources, Vol - 7, March – 2016, 108 to 114

Measurement of thermochemical properties of some metal hydrides-titanium (Ti), misch metal (Mm) and lanthanum (La) based alloys a-review

• Hanumantharaya R, Vikas G, Prem Kumar B G, Ramakrishna Devananada P , ‘Taguchi approach for the dry sliding wear behavior of granite and fly ash filled glass epoxy composites’, International Journal of Advanced Technology in Engineering and Science, Volume No 03, Special Issue No. 01, March 2015

• Dr. Ravishankar M K, Prem Kumar B G, Nithin H S, ‘Comparative Study of Performance of Four Stroke Two Wheeler Using Ethanol-Gasoline and Butanol-Gasoline Blends’, International Journal of Engineering Research & Technology (IJERT), Vol. 4 Issue 03, March-2015

  Mechanical Properties of Epoxy based Hybrid Composites reinforced with Sisal/SIC/Glass Fibers, IJERGS,Vol – 2, Issue– 5, Sept – 2014, 388 to 405

Vasundhara, MG, Senthilkumar, M & Kalavathi, GK , ‘Resonance Tuning of the SMA Cantilevered Vibration Energy Harvester Beam Experimentally with PZT Patch’ International Journal Mechanical Systems and Signal Processing. (Under review)

'Modification of Abrasive wear testing machine and Testing of materials’, IJSR, Vol.3, Issue 10, Oct. 2014

  B.Yogesha, Divya H.V, S.S.Bhattacharaya “Superplasticity and Superplastic Tensile Behaviour of AA5083”, Advanced Materials Research 902, 2014 pp.24-28.

   Sanjay M R, B Yogesha & N K S Rajan, “Experimental and CFD simulation of Producer Gas Carburetor” International Journal of Scientific & Engineering Research, Volume 5, Issue 7, July-2014, pp.782-789, ISSN 2229-5518.

Sanjay M R, Arpitha G R,Vasubdhara M G, B Yogesha, ”Study on Mechanical Characteristics of Unidirectional Sisal/Glass Fiber Reinforced Polyester Hybrid Composites ”,International Journal of Science and Research (IJSR),Volume 3 Issue 8, August 2014, ISSN: 585-588.

  Arpitha G R, Sanjay M R, B Yogesha” Review on Comparative Evaluation of Fiber Reinforced Polymer Matrix Composites” Advanced Engineering and Applied Sciences: An International Journal 2014; 4(4): 44-476, October 2014.

Vasundhara, MG, Senthilkumar, M & Kalavathi, GK , ‘Analytical Model of Electromechanical Shape Memory Alloy Based Tunable Piezoelectric Energy Harvester with Point Mass Considered at the Cantilever Tip’, International Journal of Materials and Product Technology. ( Revising)

Pradeep S, Pancholi V. Superplastic forming of multipass friction stir processed aluminum-magnesium alloy. Metallurgical and Materials Transactions A. 2014 Dec;45:6207-16.

  Arpitha G R, Sanjay M R, L Laxmana Naik, B Yogesha “Mechanical Properties of Epoxy Based Hybrid Composites Reinforced with Sisal/SIC/Glass Fibers” International Journal of Engineering Research and General Science (IJERGS), Volume 2, Issue 5, August-September,2014, ISSN: 2091-2730.

Kalavathi G.K., M. Somashekhar, Vasundhara M.G.,Yogesha K.K Analytical Study of Roughness on Tilted Pad Thrust Slider Bearing Improved by the Boundary Slippage. Applied Mechanics and Materials Vol. 895, pp 70-75.

Vasundhara, MG, Senthilkumar, M & Kalavathi, GK , ‘Numerical Simulation of Shape Memory Alloy based Tunable Vibration Energy Harvester with PZT with Tip Mass’ International Journal Sound and Vibration. (Under review)

Sanjay M R, Arpitha G R,Vasundhara M G, B Yogesha, ”Study on Mechanical Characteristics of Unidirectional Sisal/Glass Fiber Reinforced Polyester Hybrid Composites ”, International Journal of Science and Research (IJSR), Volume 3 Issue 8, August 2014, ISSN: 585-588.

Vasundhara, MG, Senthilkumar, M & Kalavathi, GK , ‘Numerical Simulation of Shape Memory Alloy based Tunable Vibration Energy Harvester with PZT’ International Journal microsystem technology. (Under review)

K. J. Dileep, M.C. Kumarswamy, “Experimental investigations on four stroke single cylinder CI engine using mixture of Calophyllum Inophyllum-Cotton seed oil biodiesel as alternate fuel” JMERT, 2014.

Sanjay M R, Arpitha G R, B Yogesha, “Investigation on Mechanical Property Evaluation of Jute - Glass Fiber Reinforced Polyester”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 4 Ver. July- August. 2014, pp. 50-57.

Shiraz pasha B R, B Yogesha, “Microcontroller based Automated Irrigation System”, The International Journal of Engineering & Sciences (IJES), Vol.3, Issue 7. (ISSN (e):  2319-1813). July-2014.

• Pavitra Ajagol, Hanumatharaya R, S. S. Balakrishna and Prem Kumar B. G. ‘Taguchi Approach for Characterization of Three-Body Abrasive Wear Behavior of Granite Epoxy Composite with and Without SiC Filler’, The International Journal Of Science & Technoledge, Vol 2 Issue 9, pp 86-91,September, 2014.

Hanumantharaya R, Ananda Kumar K M, Prem Kumar B G, Vikas G and Ashok Kumar G P. ‘Friction and Dry Sliding Wear Behavior of Granite - Fly Ash Filled Glass Epoxy Composites’, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, Issue 7, pp 14331-14338,July 2014

• Dr. Ravishankar M K, Prem Kumar B G. ‘Comparative Study of Performance of Two Wheeler Using Ethanol-Gasoline Blends’, International Journal of Science and Research, Volume 3 Issue 10, October 2014

Electronic Toll Collection System for Road Transportation

N Suhil, BS Shivashankara

The International Journal of Science and Technoledge 2 (6), 361

  A N Basavraju, Joseph Gonsalvis, B Yogesha “Performance study of Methanol Blended Petrol in SI Engine” International Journal of Engineering Science Invention, Volume 2, Issue 3, March 2013.

Superplastic Behavior of Aluminium Alloy-AA5083, IJERT, Vol-2, Issue-7, July-2013,2740 to 2748

Swathi S P, M G Vasundhara, Dr B Yogesh “ PLC based automatic liquid Racking System” International Journal of Engineering Research & Technology, vol 2 Issue 8 Aug 2013

Divya H V, Laxmana Naik L, G C Gopalkrishna, V V Bongale, Yogesha B “Superplastic Behaviour of Aluminium Alloy-AA5083”, International Journal of Engineering Research & Technology, Vol 2,  Issue 7, July-2013.

Participated and Presented Paper in the International Conference On Computer Aided Engineering-2013,IIT-Madras, Chennai.

Naveen P, B Yogesha and Manish Jain “Optimization of Robotic Arc Welding Process By Eliminating Plc To Reduce the Overall Cost” International Journal of Engineering Research and Technology(IJERT) ISSN: 2278-0181, Volume 2, Issue 6, june- 2013.

Buckling analysis of composite drive shaft for automotive applications

Book handling robot for libraries

HK Sharath, BS Shivashankar

International Journal of Engineering Research & Technology (IJERT) 2 (8)

Neethashree N R, B Yogesha, Gudipati Pradeep Kumar “Automation Of Alternator Test Bench To Ensure Accurate Testing Using Plc And Hmi”, International Journal of Engineering Research & Technology (IJERT), Vol. 2 Issue 7, July – 2013 (ISSN: 2278-0181).

Swathy S P, M G Vasundhara and B Yogesha “PLC Based Automatic Racking System”. International Journal of Engineering Research & Technology (IJERT), Vol. 2 Issue 8, August – 2013 (ISSN: 2278-0181).

B.Yogesha,Divya H.V, S.S.Bhattacharaya “Superplasticity and Superplastic Tensile Behaviour of AA5083”, Advanced Materials Research 902, 2014 pp.24-28.

A N Basavraju, Joseph Gonsalvis, B Yogesha “Simultaneous Attainment of Fuel Consumption, High Output Power and Low Exhaust Emission in a Preheated Fuel of 350cc Si Engine”, IOSR Journal of Engineering (IOSRJEN), Volume 3, Issue 4, April 2013.

Pradeep S, Pancholi V. Effect of microstructural inhomogeneity on superplastic behaviour of multipass friction stir processed aluminium alloy. Materials Science and Engineering: A. 2013 Jan 20;561:78-87.

Super Plastics Behaviour of AL alloy – AA5083, International Journal of Engg. Research & Technology, July 2013

Pradeep S, Pancholi V. Microstructural and Mechanical Characterization of Multipass Friction Stir Processed Al-Mg Alloy. Advanced Materials Research. 2014 May 26;902:18-23.

Roop R, M G Vasundhara, Dr K R Prakash “A low cost PLC based automatic liquid filling and sorting system” International Journal of Scientific and Engineering Research 2012

Participated and Presented Paper in the International Congress on computational mechanics and simulation-2012, IIT, Hyderabad.

• Participated and Presented Paper in Hyper Works Technology Conference 2012, Bengaluru.

Jeevan T. P. Divya H.V. “Finite Element Modeling For The Stress, Buckling And Modal Analysis of A Cylindrical Pressure Vessel With Torispherical Enclosure” International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181 www.ijert.org Vol. 2 Issue 6, June – 2013.

Ramesh KN, Pradeep S, Pancholi V. Multipass friction-stir processing and its effect on mechanical properties of aluminum alloy 5086. Metallurgical and Materials Transactions A. 2012 Nov;43:4311-9.

Roop R, M G Vasundhara, Dr K R Prakash “A low cost PLC based automatic liquid filling and sorting system” Proc. Punjab university   Oct 5th & 6th 2012

Pradeep S, Sharma SK, Pancholi V. Influence of friction stir processing parameters on anisotropic behavior property of 5086-o aluminum Alloy. InMaterials Science Forum 2012 Jan 25 (Vol. 702, pp. 348-351). Trans Tech Publications Ltd.

Pradeep S, Sharma SK, Pancholi V. Microstructural and mechanical characterization of friction stir processed 5086 aluminum alloy. InMaterials Science Forum 2012 Feb 9 (Vol. 710, pp. 253-257). Trans Tech Publications Ltd.

Mahesh D. C, H.V. Divya, Laxmana Naik. L, B.Yogesha& S.S. Bhattachary “Superplastic Tensile Behavior of Ti-Al-Mn alloy” International Journal of Scientific & Engineering Research, Volume 3, Issue 3, March 2012.

B Yogesha, S S Bhattacharaya “Superplastic hemispherical Bulge Forming of a Ti-Al-Mn Alloy”. International Journal of Scientific & Engineering Research, Volume 2, Issue 12, December 2011.

Sudheer Kulkarni, Vasundhara M G, Chetan S, Satish S Nadig “Comparative study of flexural behavior of silicon carbide Graphite and mixture of silicon carbide graphite filled glass fiber reinforced vinyl ester” Proc. International Conference Recent Trends in Materials and Characterization NITK Surthakal  Feb 14th & 15th 2010.

Satish S Nadig, Sudheer Kulkarni, Chetan S, Vasundhara M G “Comparative study of tensile behavior of silicon carbide Graphite and mixture of silicon carbide graphite filled glass fiber reinforced vinyl ester” Proc. International Conference Recent Trends in Materials and Characterization NITK Surthakal  Feb 14th & 15th 2010.

Chetan S, Satish S Nadig, Sudheer Kulkarni, Vasundhara M G “Comparative study of Abrasive wear resistance of silicon carbide Graphite and mixture of silicon carbide graphite filled glass fiber reinforced vinyl ester” Proc. International Conference Recent Trends in Materials and Characterization  NITK Surthakal  Feb 14th & 15th 2010.

Vasundhara M G, Chetan S, Satish S Nadig, Sudheer Kulkarni,  “Comparative study of abrasive behavior of silicon carbide Graphite filled unsaturated polyester glass fiber composite” Proc. International Conference Recent Trends in Materials and Characterization NITK Surthakal Feb 14th & 15th 2010.

Vasundhara M G, Chetan S “Comparative Study of Abrasive Wear Resistance of Mixture of Silicon carbide-Graphite Filled Glass Fiber Reinforced Polyester Composite” Proc. Recent Trend in Mechanical Engineering Vemana Institute of Technology Bangalore Nov 23th & 24th 2009.

H Nagaprasad, B Yogesha “Enrichment of Customer Satisfaction Through Total Quality Management Techniques”. Proceedings of the International MultiConference of Engineers and Computer Scientists 2009 Vol II IMECS 2009, March 18 - 20, 2009, Hong Kong.

Vasundhara M G, Chetan S “Abrasive Wear Behaviors of Graphite Filled Unsaturated Polyester Glass Fiber Composite” Proc.Advance in Mechanical Engineering Don Bosco Institute of Technology  Bangalore  Mar 30th & Mar 31st 2009.

B Yogesha, S S Bhattacharaya “Superplastic Behavior of Ti_Al-Mn alloy”. International Journal Materials Science and Manufacturing Science & Production Vol 9, Nos 1 – 2, 2008.

H Nagaprasad, B Yogesha “Enrichment of Quality and Productivity through Simple Measurement Techniques”. Proceedings of the International MultiConference of Engineers and Computer Scientists 2008 Vol II IMECS 2008, 19-21 March, 2008, Hong Kong.      

H Nagaprasad, B Yogesha “Making World Class Product Through Quality Process Management” Proceedings of the World Congress on Engineering and Computer Science 2008 WCECS 2008, October 22 - 24, 2008, San Francisco, USA.